I have recently bought a Linksys EA2700 since the router which I got from my ISP was not efficient. I bought this from eBay and it does not have any software CD. I do not know how to set it up since the last one was done by ISP people. Can anyone tell me how to configure it with my Comcast model in easy step as my knowledge about routers are pretty limited.
2
Answer
by Amery on 4 years ago
2237
Views
2
Answer
Mike on 4 years ago
I am configuring one of the servers as a VPN server as per Microsoft Tech net's "how to". The server is multi-homed with two NIC cards. I selected the NIC that I have designated for VPN use during the Routing and Remote Access setup wizard. After the wizard completed, the server became completely disconnected from the network. Although both NIC card status indicates "connected", I am unable to ping the server either by computer name or IP address, and it won't connect to the internet.
1
Answer
by Alston on 4 years ago
1048
Views
1
Answer
Mike on 4 years ago
Hello, Please let me know that how to setup Linksys Router WRT54G. I bought this Linksys router wrt54g but don't have knowledge about it.
2
Answer
by Adrien on 4 years ago
1158
Views
2
Answer
Mike on 4 years ago
How do I set up my wireless linksys router so that I don't have to keep switching the wifi back and forth from the wireless internet to the wireless printer? What documentation explains the step by step to this? Is there special configuration involved? Thanks.
1
Answer
by Martina on 4 years ago
860
Views
1
Answer
Mike on 4 years ago
Hi all, I have a WRT54G2 v1 wireless router, the issue i am facing is that once the router is started all my mobiles connect to the wireless and start working but after some time 30 to 1 hour time they disconnect either i have to restart the router or i have to go the wireless setting from my lan connected pc and just save the setting again for all the wireless devices to reconnect automatically. i am using the latest version firmware 1.00.4. Please help to resolve the issue permanently.
1
Answer
by Mahesh on 4 years ago
879
Views
1
Answer
Mike on 4 years ago
I want to know how to make my linksys router secured so my neighbors can't pick it up on their laptop, help to secure it
1
Answer
by Kenneth on 4 years ago
868
Views
1
Answer
Mike on 4 years ago
Hi, I recently bought a new WRT1900ACS router and my goal is to cascade it with my Lynksys E4200 v1. My 1900 will be the main and the 4200 the secondary. I am cascading it wan to lan to create 2 separate networks that cannot communicate. I understand how to do this but I have a couple of questions. I want to limit the 4200 to 30% of its total up/download speed and I'm assuming I need to use QOS. Since the cable from the first is plugged in an ethernet port and the 1900's end plugged in to the Internet port I'm assuming that I need to adjust the 1900 ethernet port that's being used for that. How do I do that without interfering with the other ethernet ports? What settings? Do I use E4200's MAC address? What other settings? I'm lost and I need help obviously. The second router is for kids. Thanks ahead of time!
1
Answer
by John on 4 years ago
858
Views
1
Answer
Mike on 4 years ago
Copyright 2018-20 © Router Technical Support | All Rights Reserved