Hey guys, I have security issues with my Netgear Router So I want to change NETGEAR Router password. Can anyone help in configuring my NETGEAR Router settings.
1
Answer
by Doug on 1 year ago
775
Views
1
Answer
Mike on 1 year ago
Hello everyone, I have a NETGEAR router for last 4months but I'm unable to access the services of router in all rooms of house. I want to configure a range extender with my NETGEAR router So can anyone suggest me any idea how I setup my NETGEAR router as a range extender
1
Answer
by Greg on 1 year ago
699
Views
1
Answer
Mike on 1 year ago
Some time ago I had an old NETGEAR router and I just upgraded to a brand new Nighthawk X6S (AC 3000). Netgear router provided WiFi calling facility via Verizon. But after upgrading, it does not allow Wifi calling facility, even the internet is connected. Any ideas would be great
1
Answer
by James on 1 year ago
2443
Views
1
Answer
Mike on 1 year ago
Hello everyone, can anyone help me regarding the update of firmware in NETGEAR router and modem ? According to my mind, I'm just doing a silly mistake again and again while updating it. So if anyone of you holds a good information regarding it then please do reply as soon as possible.
1
Answer
by David on 1 year ago
851
Views
1
Answer
Mike on 1 year ago
I have a Netgear N-series of router, which I have been using for quite some time. My ISP provided me with a login details to get access to my router settings page, which I never really used. But recently, when I was having issues with my router, I could not login to my Netgear router. Can anyone tell me why this happened and how can I login to my router?
2
Answer
by Emir on 1 year ago
1097
Views
2
Answer
Mike on 1 year ago
I got an Inspiron 5567 Laptop with Windows 10 x64 for Christmas. Other than my mobile phones, it is the first 5GHz device on my LAN Since then my Netgear R7000 router crashes daily. It had previously run, without crash, for more than a year. There was no problem when I kept the Laptop off for a week. At this point I am considering using Tomato Router firmware, which I used quite successfully on my old router, but if that would still leave open questions about the laptop. Tomato may allow me to log troubleshooting information that I can't get from the existing firmware. SYMPTOMS: 1. After the crash, using wired or Wifi devices, I cannot login into the router at 192.168.1.1 (no response). I can Ping it. 2. I CAN still connect between all Wired/Wifi devices on my LAN. 3. I CANNOT connect to the Internet using multiple browsers. 4. I CAN connect to the ATT Modem behind the router with a browser. 5. I CAN also connect to the Internet, with a browser, if I use VPN on an individual PC. 6. Powering the router off/on resolves the problem. Troubleshooting Actions 1. I have factory reset the router and also tested a new Netgear Router. 2. I have tried older and the newest firmware on the router. 3. Disabling Dropbox on the laptop "appeared" to fix the problem for a few days. (Using Wireshark, I noted that the laptop had, at minimum, four DB-LSP-DISC "DropBox discovery protocol" retries) All other PCs on my LAN have no retries. 4. Verified no duplicate IP addresses on my LAN. (Most all IPs are fixed, - reserved IPs by MAC address in router settings) 5. Worked with DELL to make sure the laptop has the latest drivers, etc. 6. Enable/Disable router's WPS Pin. 7. Enable/Disable 5GHz WiFi on router.
1
Answer
by Jim Dodd on 2 years ago
1548
Views
1
Answer
Mike on 2 years ago
Hey, i recently bought Netgear router N300 for my home needs. After hooking it up with my modem I realized that the modem has stopped working too. I use an iiNet connection and need to setup the router real quick. Is there a way I can setup my router without the modem?
2
Answer
by Marquis on 2 years ago
2917
Views
2
Answer
Mike on 2 years ago
Hello, I have bought a Netgear router from eBay recently, the model number of the device is N300. I want to set it up with my Windows computer whose configuration is Windows 7 OS Comcast modem 3GB Ram Intel Pentium 4 processor 2.4 GHz with 6 cores. I did not get the software CD along with the router, so what am I supposed to make it work? I tried connecting it directly to the modem but apart from blinking of lights nothing happened. Can anyone tell me what the issue is and how can I set it up?
1
Answer
by Peter on 2 years ago
850
Views
1
Answer
Mike on 2 years ago
Model: R7900|Nighthawk X6 AC3000 Tri-Band WiFi Router Hi, hoping to get some ideas on my router. This has been a bit of a process with the troubleshooting I've gone through, but I'll try to lay it out. I recently moved and switched my ISP, and tried switching my router to AP mode since the new modem has its own router. I noticed while I was working on this that the router seemed to be restarting somewhat frequently, maybe once every few minutes. This might have more to do with me attempting to connect and use devices with about that frequency, because (looking at it now) it doesn't restart that often.... but there's a good chance it will restart the moment I try to use a device connected to it wirelessly with anything remotely intensive. Anyway, steps I've taken: -reverted to factory default settings -upgraded to latest firmware -reverted to factory default settings again -changed the cable between the modem and the router -attempted to "30-30-30" reset it (to try and downgrade firmware), but that didn't seem to do anything... so instead I downloaded an earlier release of firmware and loaded it manually. -re-upgraded firmware (after much struggle... the prior firmware version seemed to like to make the router restart every 30 seconds, so I had to get into settings real quick to manually upload firmware, often non-responsive, thought it was bricked...) -reverted to factory default settings again -disabled “Wireless Router Radio 2" (attempting to reduce power, if that makes sense) -lowered 5ghz-1 to the "up to 600 mbps mode" (attempting to reduce power, if that makes sense) -switched the radio 2 and re-upped the mbps modes to max, so now I'm basically back at ground 0 It’s plugged into the ethernet port of a ZyXEL C1100Z from CenturyLink. Like said before, it's been.... decent today, restarted on me once in the morning and again just a few minutes ago. It seems that use triggers it, and it seems to happen more often right when a device connects to it (like when I turn my laptop on). If it doesn’t happen right away, after a device connects, it might act well for a while before it finally turns off.
2
Answer
by Jeff on 2 years ago
1960
Views
2
Answer
Mike on 2 years ago
I purchased Netgear N300 wireless router this evening. After a couple of hours, I conclude it is not connecting to my laptop. I also read the manual but didn't understand anything. Is something is wrong with my Netgear router? Can anybody help me to fix Netgear wireless router so I can enjoy hassle-free web browsing. Any advice is very much appreciated!
1
Answer
by Barry on 2 years ago
756
Views
1
Answer
Mike on 2 years ago
Hey guys! my Netgear WNR2000v5 router is not connecting to iPhone. I have restarted my iPhone and router but the problem is same. Any suggestions for this issue?
1
Answer
by Vance on 2 years ago
1840
Views
1
Answer
Mike on 2 years ago
I am trying to setup WiFi network but my Netgear router is not connecting to the internet. I can access the internet when I connect modem with a hard-line connection. There is no internet when I connect Netgear router through wired or wireless connection. Help me to resolve Netgear router issue as soon as possible!
1
Answer
by Trey on 2 years ago
953
Views
1
Answer
Mike on 2 years ago
I have a Netgear DG834gV4 modem router and works fine with my Dell laptop when connected to the ethernet cable. But when my friend connects his laptop to Netgear router wirelessly, there is no internet connectivity. I don’t understand why this is happening? Although I have checked Netgear router settings but everything is OK. Can anybody help me troubleshoot Netgear router issue?
1
Answer
by Drew on 2 years ago
1238
Views
1
Answer
Mike on 2 years ago
Hi I am trying to change WiFi password of my Westnet modem. When I open Westnet login page, it keeps telling me incorrect username and password. Please help me how can I modify Westnet modem’s password in such circumstances? Thanks!
1
Answer
by Dennis on 2 years ago
969
Views
1
Answer
Mike on 2 years ago
I have connected two PC from my Netgear WGR614v2 router. When I connect the router to both PC via modem (ZTE ZXDSL831 series) then my internet connection becomes very slow, I don't know why this is happening? On the other hand, when I connect only 1 PC to Netgear router and modem, I get speed up to 5mbps. I have tried resetting, rebooting but still, there is some problem with Netgear router. Can anyone fix my Netgear WiFi router so that I can enjoy good internet speed on both PC at the same time?
1
Answer
by Robert on 2 years ago
975
Views
1
Answer
Mike on 2 years ago
I have a Netgear R6220 at home and the internet is shared by 4 devices. I have been using this router for 4 months and suddenly last night it stopped working. I have reset it a couple of times but nothing happened? Anyone have any suggestions?
1
Answer
by James on 2 years ago
1300
Views
1
Answer
Mike on 2 years ago
I am using Netgear WNR614 N300 Wi-Fi router from a long time and never had any problem with it. But recently I shifted to a new house and here I am experiencing connectivity issues with my Netgear router. I don't understand is there something wrong with Netgear router settings. Please help me to fix Netgear router settings so that I can enjoy the hassle-free internet. Thanks in Advance!
2
Answer
by Aiden on 2 years ago
1299
Views
2
Answer
Mike on 2 years ago
Hello guys! I am using Optus provided Netgear modem. I want to change wireless name and password because I think someone is leaching my internet. When I type "192.168.0.1" in the address bar, Optus Netgear gateway does not display on the screen. I don't know why this is happening? Please provide me some easy steps through which I can easily change wireless name and password (Optus-CG3000). Thanks!
1
Answer
by Gary on 2 years ago
1423
Views
1
Answer
Mike on 2 years ago
I am trying to register my Netgear router but the error is occurring again and again. And each time different error is displaying, sometimes it says “This router has already been registered” and sometimes “Unable to register” message displays on the screen. I want to register my router to change my WiFi password. Please help me in this context! Any responses are highly appreciated!
1
Answer
by Dennis on 2 years ago
1593
Views
1
Answer
Mike on 2 years ago
Hello everybody!!! Here I want to discuss how do I make it configure Netgear router for GTPL broadband in an easiest way. Just help me to fix such a critical issue. I have no idea how to troubleshoot it? I resolve it and configure but failed to do? Give me a nice suggestion so that it would be helpful for me and can be sought out in my troubled technical condition. I am using now GTPL broadband connection with a Netgear router as wireless and also guide me how to troubleshoot if I am using a wired router device.
1
Answer
by Harry on 2 years ago
1391
Views
1
Answer
Mike on 2 years ago
I don't understand why my Netgear router is not connecting to PC. I have checked all physical connections and internal settings, everything is OK yet I am unable to access the internet with my Netgear router. Help me to troubleshoot Netgear router's issue so that I can access internet without any inconvenience.
1
Answer
by Kev on 2 years ago
863
Views
1
Answer
Mike on 2 years ago
I don't understand why port forwarding is not working on my Netgear router. I want to setup media server in my house, but unable to do so because I am unable to open ports on my Netgear router. I have also tried FTP but it does not work. Can anyone have a solution to this issue?
1
Answer
by Sonk on 2 years ago
667
Views
1
Answer
Mike on 2 years ago
Take technical assistance, for troubleshooting Netgear router resetting glitches? I need help, for resetting my netgear router as wired or wireless. What to do? Give me your suggestions so that I can proceed my work in a well professional manner. How to reset my netgear router? Take my device via remote system access.
1
Answer
by Aryana on 2 years ago
635
Views
1
Answer
Mike on 2 years ago
I am using the Netgear Genie Interface to set up and successfully connected to Netgear EXT, but later, when the genie creates a name for a new extender WiFi network and I opt to use the same security settings. When I press click on "continue" nothing happens. I checked the networks and the "new" extended network does not yet exist. What should I do to install Netgear router?
1
Answer
by Reed on 2 years ago
888
Views
1
Answer
Mike on 2 years ago
I have netgear router WGR614v9. The system is connected to router by router to internet connectivity is not working. the o/s is Windows Vista \ here is the map XXX-PC -----------> Wireless Network 2 -------x-------Internet If I connect the system to modem, internet works.
1
Answer
by Garrick on 2 years ago
910
Views
1
Answer
Mike on 2 years ago
Copyright 2018-20 © Router Technical Support | All Rights Reserved