I am using netgear router n600 with dual band router and it wont turn on, I know its not dead since the power button is on but the blue light on top of the router wont turn on. is it working? but then why can't i find it on my ipod?
1
Answer
by Jennifer on 2 years ago
4323
Views
1
Answer
Mike on 2 years ago
I have the Xfinity's latest modem duo, but it is located in the office room which is in the basement. It does not have a good signal for the upstairs, except in the room directly above the router. I have a Netgear N600 Wireless Dual Band Router (WNDR3400) that I want to use as a wireless "hotspot". Unfortunately, my knowledge with this goes as far as using one router. So I need help figuring out how to get my Netgear Router to be in a listening mode to bounce the signal from the Xfinity router to the upstairs. Please help!
1
Answer
by Ivor on 2 years ago
1078
Views
1
Answer
Mike on 2 years ago
Recently I purchased Netgear c3700 router. I am not able to access Google and Youtube. I have tried rebooting the router doing a factory restore and a power cycle but the issue persists. The problem is consistent through out all my devices whether it is PC, mobile devices (Android or iOS) and as well as Mac. I have attempted to disable firewall and decrease MUT but the issue persists. The only thing I have not messed with is DMZ, to be honest, I am not sure what to do with it even if I did mess around. I don't know whats going on so please help me. I would appreciate any help.
1
Answer
by Aiken on 2 years ago
938
Views
1
Answer
Mike on 2 years ago
I reset it and reinstalled it using cd but can't login to routerlogin.com using username admin and password password. I tried different combination like routerlogin.net or password 1234 but nothing worked. I called Netgear Customer Service and they said I need to pay $18 to get help. Can somebody help me?
2
Answer
by Zack on 2 years ago
969
Views
2
Answer
Mike on 2 years ago
I have a Netgear N750 Dualband Gigabit router. Earlier, it was working absolutely fine but suddenly I can't connect to anything. My Skype contacts are not loading properly. But when I switch to the Comcast modem, it loads them all. Sometimes router shows its loading a web page but never does, and then sometimes it doesn't even do that. Please help me.
1
Answer
by Aaron on 2 years ago
1045
Views
1
Answer
Mike on 2 years ago
I have Netgear WNR614 N300 Wi-Fi Router which I connect to my PC. But nowadays I am experiencing that the internet is disconnecting in every 30 seconds- 5 minutes. I am running all the new updates with my router and router but when I use my phone it connects just fine and runs fine. I have already unplugged everything for 30 seconds or more multiple times, have reset the whole router, and restart my computer, and still hasn't fixed it. I have been trying to play League of Legends and when I get into a game my internet hangs around 60-90ms and then eventually get a lag spike that lasts from 10-30 seconds saying trying to reconnect and it is non-stop. No one is on the internet besides me and I have nothing running in the background so is there any other way to fix this?
3
Answer
by Felix on 2 years ago
3495
Views
3
Answer
Mike on 2 years ago
I have the problem of no connection when my new Netgear WNR834B router is connected to my new Dell laptop. I can connect directly to my insight cable broadband connection via ethernet from the laptop to the Motorola cable modem, but when I go through the steps to install the router, it continues to say, "no connection," and then instructs me to check the physical connections, which I've tried at multiple times.
2
Answer
by Sandra on 2 years ago
1191
Views
2
Answer
Mike on 2 years ago
I have a Dell Inspiron 6000 laptop and Netgear WGR614v6 that connect wirelessly, however, I cannot connect to the internet. I can connect the laptop to other wireless connections without any interruption. Is this an IP problem or something else? Please help me to fix this issue.
2
Answer
by Gary on 2 years ago
851
Views
2
Answer
Mike on 2 years ago
I have Netgear router wpn824 v2. But I am unable to download the software because I am not getting the latest version which I can install on Dell Laptop (Windows 7). Can anybody help me?
2
Answer
by Mark on 2 years ago
901
Views
2
Answer
Mike on 2 years ago
I recently purchased Netgear WN3000 RP Universal Wi-Fi Range Router. It was working smoothly from one month. But after one month, technical issues have started. I found that there was a problem with Mac Address Filtering. I also modify MAC address to router list but there is no effect. I have also read manual but I am unable to figure out the solution.
1
Answer
by Hary on 2 years ago
929
Views
1
Answer
Mike on 2 years ago
Yesterday, I purchased Netgear router and Hughes ht2000w modem. After setting up both devices, when I trying to connect my iPad to Netgear router, there was no sign of internet, in fact, it says the internet is not available. The same thing is happening with other devices that I was trying to connect to my Netgear router.
Please suggest me something so that I can enjoy high-speed network with my Netgear router.
2
Answer
by Dwight on 2 years ago
4255
Views
2
Answer
Mike on 2 years ago
I bought a netgear rangemax n150 wireless router and after i set it up, it wouldn't let me connect wirelessly from another computer. it shows that is connected but it doesn't go online. whats the problem?
1
Answer
by Toby on 2 years ago
778
Views
1
Answer
Mike on 2 years ago
I have a netgear rangemax WPN824 v3. It did not come with software and when i plugged it in correctly, it didn't connect to internet or anything. Someone help please.
2
Answer
by Lucas on 2 years ago
1135
Views
2
Answer
Mike on 2 years ago
Get me on the Network to print wirelessly? I am using vista and under printer sharing it is currently saying PASSWORD REQUIRED. But gives no option to enter one anywhere.
2
Answer
by Adriana on 2 years ago
1013
Views
2
Answer
Mike on 2 years ago
If my Netgear is plugged into my laptop via ethernet then my internet works fine, but if I try to use it wirelessly it doesn't work. Please help me.
1
Answer
by Victor on 3 years ago
1653
Views
1
Answer
Mike on 3 years ago
I was messing around with the advanced wireless settings in my router and now my wireless pc doesn't want to connect to the net. Will resetting the whole thing work?
1
Answer
by Zoni on 3 years ago
1462
Views
1
Answer
Mike on 3 years ago
41% off $500 Cisco ASA5506 Security Plus license L-ASA5506-SEC-PL= for ASA 5506 Firewall which increase IPsec VPN tunnels to 50 increase vlan to 30 enabling HA.
1
Answer
by Olaf on 4 years ago
1437
Views
1
Answer
Mike on 4 years ago
I recently bought a Netgear wireless router for my home as I currently work from home and require good connectivity and high internet speed all the time. The service providers in my locality does not provide any good or high-speed plans, so one of my friends suggested to connect my router with hughes satellite. The problem is I am not aware about these settings or how does this Hughes satellite work? Can anyone here help me configure my router for hughes satellite, I have already bought the modem for satellite.
1
Answer
by Narwin on 5 years ago
5490
Views
1
Answer
Mike on 5 years ago
Model Wpn824 We have had this for about 4 years with no issues. Internet provider is cable. Nothing has moved or disconnected. About a month ago I had to change the security setting on my Netgear, because of an unwanted user in the area was picking up my signal. I changed to the WPA-PSK [TKIP] setting and put the password in and my children were able to connect to the internet on their own computer in their rooms. Now all of a sudden they both cannot get onto there computers even though, it says "strong signal", but they cannot get on. They did put the password in, but they still can't get on. NOTE: When I go to attached devices, my son's Ipod shows up, but he cannot get on the internet. I read elsewhere where it says to turn off/unplug the modem and Netgear, but will I have to reset everything again and will this resolve the issue? OR Do you have another suggestion? I am not that computer savvy, so easy directions will be greatly appreciated.
1
Answer
by Morry on 5 years ago
2665
Views
1
Answer
Mike on 5 years ago
I'm not a computer whiz and need exact instructions for how to update the firmware on netgear wireless router. I called netgear and they wouldn't help me. I don't want to spend another 100+ on a router.
1
Answer
by Kert on 4 years ago
1118
Views
1
Answer
Mike on 4 years ago
Hello, Please let me know that what do i do if i forgot my Netgear wifi password. I have no idea about reseting Netgear wifi password.
2
Answer
by Kenty on 4 years ago
1116
Views
2
Answer
Mike on 4 years ago
I have forgotten what the password is I am't very proficient in computers my knowledge is average but I cannot access the wireless router as I don`t know the pass-phrase.
2
Answer
by Judy on 4 years ago
1140
Views
2
Answer
Mike on 4 years ago
I need to change the password and Name of my netgear router. How do I go abouth this? Please help much appreciated.
4
Answer
by Joseph on 4 years ago
1252
Views
4
Answer
Mike on 4 years ago
When we got a wireless router we didn't have a laptop. the tech secured the wi-fi and wrote down the password my husband misplaced it now i have a tablet and i am unable to connect to the internet(wi-fi) so how can i find out the password or reset it without the old password?
1
Answer
by John on 4 years ago
1141
Views
1
Answer
Mike on 4 years ago
I have a Netgear N600 Wireless Dual Band Router that I want to use as a wireless "hotspot" (or I believe Netgear calls it a repeater). Unfortunately my knowledge with this goes as far as using one router. So I need help figuring out how to get my Netgear Router to be in listening mode to bounce the signal from the Xfinity router to the upstairs. Please help!
2
Answer
by Jimmy on 4 years ago
4185
Views
2
Answer
Mike on 4 years ago
Copyright 2018-20 © Router Technical Support | All Rights Reserved