Techfacture Wifi Extender Setup User Manual

If you are facing weak signals at your home or workplace, then getting a tech-facture Wi-Fi extender will be the best option for you.

You can install the tech-facture wifi extender at your desired place and have a more reliable connection in dead or weak zones of the house or office. To properly set up the extender, you need to first place it correctly at the desired location.

The next step is to connect the extender and log in to the extender's setup page to customize the settings accordingly. Once you are done setting up the extender, you can enjoy the internet service without any interruption.

Steps for Setting Up Techfacture Wifi Extender

Step 1: Plug in the Techfacture Wifi Extender into a power outlet

Step 2: Locate the SSID (network name) of your existing Wi-Fi network

Step 3: Connect to the Techfacture Wifi Extender using your device (smartphone, laptop, etc.)

Step 4: Open a web browser and enter the IP address of the Techfacture Wifi Extender

Step 5: Login to the device’s web interface using the default username and password (if you haven't changed it)

Step 6: Change the device's network name and password to match your existing Wi-Fi network

Step 7: Select the option to extend your existing Wi-Fi network

Step 8: Save the changes and restart the device

Getting Started

Before setting up your Techfacture Wifi Extender, you need to have the following items:

• Techfacture Wifi Extender
• A device with internet access (PC, laptop, smartphone, tablet)
• An active wifi network

Step 1: Connecting the Extender to a Power Source

Plug the Techfacture Wifi Extender into a power outlet near your router. Ensure that the power outlet is easily accessible so that you can unplug the device if needed.

Step 2: Finding the Extender's SSID

Once you have plugged the extender into a power source, wait for the device to turn on. When the device is ready, it will start broadcasting a new SSID (network name).

To find this new network, follow these steps:

• On your device with internet access, go to the wifi settings.
• Look for the SSID broadcasted by the Techfacture Wifi Extender (e.g. Techfacture_EXT).
• Connect to the SSID by entering the password (if required).

Step 3: Accessing the Extender's Web Interface

After connecting to the SSID broadcasted by the Techfacture Wifi Extender, you can now access the device's web interface.

To do this, follow these steps:

• Open a web browser on your connected device.
• Enter the default IP address of the Techfacture Wifi Extender in the address bar (e.g. 192.168.1.1).
• Enter the default username and password when prompted. You can find these details in the user manual or on the manufacturer's website.

Step 4: Configuring the Extender

After accessing the web interface, you can now configure the Techfacture Wifi Extender to extend your existing wifi network.

To do this, follow these steps:

• On the web interface, go to the network setup page.
• Find the option to extend an existing network.
• Select your active wifi network from the list of available networks.
• Enter the password for your active wifi network.
• Save the changes and wait for the extender to restart.

Step 5: Testing the Extender

After the extender has restarted, you can now test the device to ensure that it is working properly.

To do this, follow these steps:

• Move to a location that previously had poor or no wifi coverage.
• Check if your device can now connect to the internet in this location.
• If the device can connect to the internet, your Techfacture Wifi Extender has been set up successfully.

Conclusion

Setting up the Techfacture Wifi Extender is a simple and straightforward process that can be completed in just a few steps. By following the instructions in this user manual, you can easily extend your existing wifi network to provide better internet coverage in your home or office.