Please try the subsequent identifying and fixing if you have configured your range extender step-by-step and the LED lights are illuminated but there is no access to the internet or if the extender is operational but the internet link is unstable.
Follow the below-mentioned approaches when the TP-Link range extender can't connect to my router. Please refer to the first procedure if you are unsure of how to access your router's management page to verify your IP address; otherwise, refer to Method 2.
Please use an Ethernet cable or Internet access to connect your machine to your main router, then verify the computer's IP information.
Step 1: Log in to your extender's management page.
Step 2: Settings > Network Network Settings: http://www.tp-link.com/en/support/faq/1398 select 'Use the following IP address'.
Step 3: Save
Step 4: DHCP server: select 'on' 10.0.200.X is the IP address. Set a limited range for the main router's IP address pool.
Step 5: Lease Period for Address: 1440
Step 6: Fill in the IPv4 DHCP server listed in the computer's Network Connection Details for the default gateway and primary DNS.
First, set up the range extender as you normally would.
Examine the DHCP Configuration Information on the Router's Management Page after that:
Step 1: The IP address displayed on this page is the router's LAN IP.
Step 2: The extender's DHCP settings need to have the subnet mask filled in.
This range has been set on the main router; on the extender, a smaller range needs to be set. - IP address (router's LAN IP): 192.168.0.1 1 - Subnetwork Mask: 255.255.255.0 - IP tackle pool: this spectrum is set on the router that runs the network.
Step 3: 192.168.0.100-192.168.0.199 is the range of IP addresses for the main router.
Step 4: IP address pool: 192.168.0.150–192.168.0.199
Step 5: On the management page for the extender, we must configure all the information in red text.
Remove the wireless network profile from the range extender and reconnect it if only one end instrument is unable to connect to the range extender's WiFi. And directly connect it to the internet router to determine if it can establish a connection.
If the extender's firmware is outdated, this sort of problem may arise. Process: Make sure that the extension cord is plugged into a live electrical source and connected to the supplied power adapter. Ensure the client the gadget is attached to the extender's network and that the enhancer is within the wireless router's range.
Find the Ethernet cable that connects your wireless router to your PC and unplug the end that is attached to it. Next, connect it straight to the reach extender. This will create a link via Ethernet between the PC and the range extender.
You can set up you're NETGEAR WiFi fluctuate extender using WiFi security settings (WPS) without entering the network name or password. Not all routers offer WPS support. You must configure your extender using a different method if your router lacks a WPS button.