ACT fiber net uses fiber network cable to provide you with internet service. It uses multiple Wi-Fi routers that are powered by various manufacturers such as D-Link, Digisol, Tenda, TP-Link, etc. One may require to factory reset an ACT fiber router if you forget the username and password of your router by changing it.
You may also need to reset your router if you are facing disconnection issues or your Wi-Fi is not performing properly. You can reset your ACT router by applying two different methods One is by performing a soft reset and the other one is by pressing the reset button on your router.
Step 1: First of all, turn on your ACT router and use a DC adapter in case it is not connected to a power source.
Step 2: Use a LAN cable and use it to connect your PC and laptop.
Step 3: Please ensure that the LAN settings of your computer are in DHCP mode.
Step 4: Launch your internet browser and then enter the IP address 192.168.0.1 in the location bar of your web browser.
Step 5: Now, you will enter the login page. Enter admin in the username section and act@123 in the password section. After that, click on the login button.
Step 6: Go to System Tools and then go to the factory default option. Now, you will see a message that says restore settings to factory default.
Step 7: After that click on OK to reset your router.
Hard reset is the best way to access your router settings I'd you forget the login username and password.
Below are the easy steps that you need to perform to complete a hard reset.
Step 1: Search for the reset button on your router. This button is usually near the power button or Ethernet ports.
Step 2: Take a Pin or needle to press the reset button on your router.
Step 3: Press the reset button and hold it for at least 10 seconds and then release it.
Step 4: Now, your router will restart automatically and will take 3-4 minutes to complete the reset process.
Step 5: After that, try to log in to your ACT router again.
Keep in mind that ACT router reset steps may differ from model to model. If you wish to get a reset guide, then you can drop an e-mail with the brand name and model name.