How To Setup Repeater Mode On My DIR-612 Router ?

Setup Repeater Mode On My DIR-612 Router:

Using a repeater is always preferable to boost the internet signal without having any need to move your computer or router either. The process to setup repeater mode on my DIR-612 router is quite easy as it entails following a series of steps mentioned in this quick guide.

So, just go on to peruse this unique guide and be successful to setup repeater mode on my DIR-612 router anytime.

Step 1 - If you wish to setup repeater mode on my DIR-612 router then please begin by noting that you will have to open your internet browser and must punch in http://dlinkrouter, http://dlinkrouter.local, or http://192.168.0.1 in the address bar.

Step 2 - Don’t forget that the default username is “Admin” and the password if you haven’t changed the same is to be left blank. Thereafter, you must move ahead to press the “Login” button.

Step 3 - In this stage, you must click the “Wireless” tab shown on top followed by clicking on “Wireless Repeater” from the menu given on the leftward pane.

Step 4 - At this point in time you should place a tick on the check box with the message “Repeater Enabled” followed by feeding in the desired SSID of the AP. Alternatively, you may click on “Site Survey” to see the given list of available APs.

Also, note that after you have selected the desired AP you click on “Next” to continue. This way we will be halfway through to setup repeater mode on my DIR-612 router and the steps that follow tend to accomplish the process to setup repeater mode on my DIR-612 router going forward.

Step 5 - Now, in the field shown just punch in the “Pre-Share Key” followed by clicking on the “Next” button.

Step 6 - In the text field adjacent to the “IP Address” heading, just check that the IP Address fed in and shown therein is the same as that of the router.

Step 7 - Here at this stage just click “OK” to continue followed by pressing the “Finish” button to effectuate the configuration. Please also make sure that you reboot the “Client Device” to end up receiving the new IP Address.

The noteworthy point  

The latest SSID of the Repeater happens to be “D-Link_DIR-612” which can be punched in as required in Step 5 above to setup repeater mode on my DIR-612 router. You may also resort to following the relevant guide on changing the Wireless SSID.