Most of the users setup their new router using the WPS feature functionality. Though there are many other ways to set up a Linksys Extender but you may encounter spectrum router WPS button not working issue. Considering that you don't find the WPS Button on the router, then you can easily turn ON the virtual WPS Button present on your admin router page.
Usually, it is preferred to go with the WPS Linksys Extender Setup as this method is quite easy and fast. For this, you just have to push the WPS on the Extender and a WPS on Router. In order to access the WPS settings, you will have to access it by logging into your router admin panel.
Additionally, you can also use this setup option when you are not able to do Linksys Extender Setup without CD which means you can do it through Smart Setup Wizard. You can find the setup on this link i.e. extender.linksys.setup or extender.linksys.com.
WiFi Protected Setup (WPS) is a secure and reliable way of connecting to WiFi without requiring any password detail. For applying this method, you just need to make sure that your wireless device supports WPS or Push 'N’ Connect option. However, instructions might slightly vary based on the router you own.
Sometimes, you face issues while setting up the router using WPS button. The most likely issue you might get is the low wireless signal strength. Not to worry as with this quick post, you will be able to understand the process to fix the spectrum router WPS button not working problem. Let us proceed.
Steps to follow for spectrum router WPS button not working issue
Step 1: Firstly, login to your spectrum router account using the router's default IP address. This IP address information is usually given at the back side of your Linksys router.
Important Note: If in case you are unable to check or find the IP address, then you can simply contact to your Internet Service Provider.
Step 2: Now, in order to login into the Linksys router or other kind of routers, you will require the username and password. Generally, the default username for this router will be admin and password will be the word password itself.
Step 3: Upon the successful login into the spectrum router panel, you have to search for that particular tab which says wireless connection.
Step 4: Now, here in the wireless connection option, you will see a WPS option having a symbol of upward and downward arrow keys.
Step 5: Click on that specific WPS option and you will notice that the WPS light on router starts blinking.
Step 6: In the last step, you just have to push WPS on the extender device. While in the next few seconds, you will start getting a high speed configured Linksys extender.
Hope this guide is useful to resolve the spectrum router WPS button not working issues. Now, you can connect your wireless devices (laptops, smartphones, tablets, etc.) to your network with the push of a button.