1
Ans
1 year ago
If you want to make changes in your router network then it is essential that you get to login to a Medialink Router and get access in the admin setup interface so that you can make configuration in those settings.
The basic requirements to access the Medialink Web Interface are any series of medialink routers, a reliable network access either through LAN cable or through Wifi Connection and any installed web browser on your system.
After having all the basic requirements you need to follow some instructions in order to access the set up page of the router like make sure that you are connected to your Medialink Router then launch web browser by entering 192.168.8.1 and then finally enter the login username and password and now have got an access to the set-up page and you can make changes and save it for application.
Just after you login to a Medialink router, you can access its web interface which is pretty simple and all you will require has been listed below:
Now, following are the instructions to connect to your Medialink router's interface for configuration and diagnostics purposes.
In order to reach the login panel and then set up the settings of your Medialink router, you should be connected to its network. So let us quickly start by connecting to the network which may be either through wifi or through Ethernet (LAN) cable.
Important Tip: In case you have forgotten the wifi password for your Medialink router, you can always connect to it using an Ethernet cable that doesn't require any password information.
Now, the next step is to open your installed web browser on your system. Once opened, enter the specific IP address for your router into the address field. Most commonly the IP for Medialink routers is 192.168.8.1. But if that IP address doesn't work, then you can search for the default Medialink IP address list which is specific to your router model.
Quick Tip: Since you have already connected to your Medialink router, you can simply make use of an online tool known as whatsmyrouterip.com to quickly find the IP. It is basically the "Router Private IP" value.
Here, you can type the IP into the address field and press the go button.
In the last step on the login page, you will find the username and password fields. So, enter your current username and password and press enter / sign button to login to a Medialink router.
If you are not aware about the login username and login password for your router, not to worry, You can check the default Medialink credentials to see what the defaults are, and how to reset them. You can also find the router credentials at the back side of the router device, present on its label.
So, that's all as you are now ready to configure anything you want on your router device.
Steps to Configure your Medialink Router:
Once after you login to a Medialink router, you are all set to modify the router settings your own way. When you have logged in to the Medialink admin interface, you should be able to change any settings that are available from the admin panel. Just make sure that you are not breaking or interrupting the router network while setting up the router configuration.
Important Tip: Please note down the current settings of your router before changing anything so that you can always revert it in case of any troubles.
In any case, you have mistakenly made a change that breaks your Medialink home network, you can always take back to the original router settings to zero by using the generic 30 30 30 hard reset trick.
This is generally the last step of router configuration and setup. And if you still have access to the Medialink interface, you can always try to login to a Medialink router and revert the settings first. (Here, we assume that you have written the original or default settings somewhere before changing them)
Hope this quick article for login to a Medialink router is helpful for the users.
Copyright 2018-23 © Router Technical Support | All Rights Reserved