How to Enable a UPnP 2Wire Router on U-Verse

Enable a UPnP 2Wire Router on U-Verse:

Universal Plug and Play (UPnP) helps devices, for example Internet appliances and computers access the network and connect to other devices as required. UPnP devices can automatically find the services from other registered UPnP devices on the network.

In case, you take applications like multiplayer gaming, counterpart connections, or real-time communications like instant messaging or remote assistance (a feature in Windows XP), Enable a UPnP 2Wire Router on U-Verse.

An AT&T 2Wire router can work like a DSL modem or wireless router, so you can use it with any type of U-verse Internet service. 2Wire offers an easy Web-based configuration to make it simple to enable a UPnP 2Wire Router on U-Verse and configure your new router in minutes. The router's Universal Plug and Play, or UPnP, element permits you to connect various kinds of network devices and share files over all of them.

Steps to How to Enable UPnP on ATT Router

Step 1: Connect one end of an Ethernet cable into one of the router's LAN ports. There are generally three to five of these ports available on the back of the router. Connect the other end of the cable into the Ethernet port on your computer.

Step 2: Access the gateway user interface by entering ‘http://gateway.2wire.net’ (without quotes) into your Web browser's address bar, and then pressing ‘Enter.’

Step 3: Choose the ‘Home Network’ tab to open a list of the devices on your network. To open the UPnP feature, tap ‘Access Shared Files,’ and after that select ‘Enable.’ You can now access your files from any computer or mobile device connected to the network.

That's it, now you can enable UPnP on ATT router.

To Modify the Channel on my AT&T U-Verse Wireless Router

AT&T U-Verse is an aspect that provides customers to subscribe to phone, cable and Internet service via one package. AT&T U-Verse is supplied through a fiber optic cable line and is connected to an AT&T U-Verse wireless router, manufactured by 2Wire. If you have an interruption in service or a poor wireless signal, you can fix the problem through changing the channel on your AT&T U-Verse router.

Steps to Change the Channel on My AT&T U-Verse Wireless Router:

Step 1: Launch your Web browser and type ‘http://gateway.2wire.net’ or ‘http://192.168.1.254’ into the address bar to launch the 2Wire home page.

Step 2: Tap on the ‘Home Networking’ tab placed at the top of the menu bar. Click ‘Edit Settings’ located on the right side panel.

Step 3: Scroll down to the Wireless Channel section. Select a wireless channel from the drop-down menu. Scroll to the bottom of the page and click ‘Save’ to save the changes made to your wireless router.