How to Fix 5GHz Network Is not Working Issues
Fix It When a 5Ghz Network Isn't Working
The problem with the 5 GHz network is that it doesn't always look the same. There are several different reasons behind the nonworking problem with the 5 GH network. With the help of microwaves and Bluetooth devices, the 5GHz wifi networks undergo less noise and interference.
You are also also allowed to transfer data at a faster rate with less battery usage. However, there is a disadvantage that may cause trouble and obstruction while using the 5GHz wifi network. The adapter you use may or may not support the 5GHz network. Household obstacles like walls can also affect the 5GHz network, and sometimes, the updated drivers and windows can be a cause of the problem, too.
How Do We Fix the 5Ghz Network If It is Not Working?
You can troubleshoot the 5GHz Network is not working issues by the following steps -
Checking the network adaptor support
- Firstly, you have to make sure that the network card you are using supports 5GHz.
- Click the Windows key and R key simultaneously.
- It will open the run dialogue.
- Type "devmgmt. msc" and hit "ok". It will open the device manager.
- You have to find the network adaptor now and see if 5GHz is enabled or not. If it is not enabled, then you will have to change the network adaptor mode.
Try Removing All the Known Networks
You have to first go to the settings sections, click on the "network and internet" option, select Wi-Fi, and then manage known networks. You can now remove the known networks that are causing problems. Perform a restart on your PC once the 5Ghz network shows up again.
Try Checking the Compatibility of Your Router
You have to make sure that your Wi-Fi router shares compatibility with 5 GHz frequencies. You can connect to the router with the help of an ethernet cable to solve all router-related issues.
Try Updating the Network Adapter Drivers
An outdated adapter driver can cause a lot of problems for you. It is highly recommended that you visit the manufacturer's official website to update the network adaptor driver and install the correct drivers.
Insert Correct Credentials
It is one of the most common mistakes committed by many individuals. If you enter an incorrect password, you will not be able to connect to your 5GHz Wi-Fi network. It is always a better idea to ensure that you enter the correct password.
All of the above-mentioned steps may vary depending on your router configuration and the system. If, after trying all the steps, the issue is still not fixed, then you can also consider seeking professional help.
Also Read:
Frequently Asked Questions
Q1. Why can my phone see 5GHz WiFi but my laptop cannot?<-
Ans: This usually means your laptop WiFi adapter does not support the 5GHz band or its drivers are outdated. Newer phones almost always support 5GHz but older laptops especially those made before 2015 may only have 2.4GHz single-band adapters. Check your laptop adapter by opening Device Manager, expanding Network Adapters, and looking at the adapter name. If it says 802.11n without mentioning ac or ax, it likely only supports 2.4GHz. You can add 5GHz support to an older laptop by plugging in a USB WiFi adapter that supports 802.11ac or WiFi 6.<-
Q2. How do I check if my WiFi adapter supports 5GHz?<-
Ans: Open Command Prompt and type netsh wlan show drivers then press Enter. Look for the line that says Radio types supported. If it lists 802.11a or 802.11ac or 802.11ax, your adapter supports 5GHz. If it only shows 802.11b, 802.11g, and 802.11n, your adapter is 2.4GHz only. You can also check in Device Manager by double-clicking your network adapter, going to the Advanced tab, and looking for a Preferred Band or Wireless Mode setting that mentions 5GHz.<-
Q3. Can walls and distance affect my 5GHz network more than 2.4GHz?<-
Ans: Yes, 5GHz signals have a significantly shorter range and weaker wall penetration compared to 2.4GHz. This is a fundamental physics limitation of the higher frequency. A 5GHz signal typically covers about one-third the distance of 2.4GHz and loses much more strength passing through concrete walls, brick, and multiple floors. If your device is far from the router or separated by thick walls, it may not see the 5GHz network at all. Move closer to the router or consider a mesh WiFi system for better 5GHz coverage throughout your home.<-
Q4. Should I use the same SSID name for both 2.4GHz and 5GHz networks?<-
Ans: Using the same SSID for both bands lets your devices automatically switch between them based on signal strength which is convenient. However, this can cause problems when devices stay stuck on 2.4GHz even when 5GHz is available. Using separate SSIDs like HomeWiFi and HomeWiFi-5G gives you manual control over which band each device connects to. This is especially useful for devices like smart TVs or gaming consoles where you always want 5GHz, and for IoT devices like smart plugs that only work on 2.4GHz.<-
Q5. How do I force my device to connect to 5GHz instead of 2.4GHz?
Ans: The easiest way is to use separate SSID names for each band and only connect to the 5GHz network name. If your router uses the same name for both bands, go to your device WiFi settings, forget the network, then reconnect. On Windows, you can set a 5GHz preference by opening Device Manager, double-clicking your WiFi adapter, going to the Advanced tab, finding Preferred Band, and setting it to 5GHz. On Android and iPhone, there is no built-in band preference setting so using separate SSIDs is the most reliable method.