The web interface of the Sitecom router is its control panel. This is the place where all the settings are saved and changed.
If you wish to make changes in your network, then you are required to log in to your Sitecom router. Mentioned below are the settings that you need to perform for connecting your Stecom router.
In order to reach the setup page of your Sitecom router, you will have to connect it to the network. So, you need to connect it to the network either through an ethernet cable or wifi.
In case you don't know the password of your Sitecom router, then it is advisable to connect it using an ethernet wire. For this, you don't need a password.
Launch the internet browser and enter the IP address of your Sitecom router in the location bar of the browser. 192.168.01 is the most common IP address.
In case this IP address does not work for you, then start searching for the default IP address for your model. Now that you are already connected to the Sitecom router, then you can go to routerip.com to find the IP address.
Now enter the username and password of the router in their respective fields. In case you don't know what the username and password of your router are, then check the default credentials of your Sitecom router.
You can also see the credentials printed at the back of your router.