The web interface of the router is its control panel and that is the place where the settings are saved or can be modified. In order to make modifications in the network settings, you will have to log into your Zyxel router.
The basic things that you need to access the Zyxel web interface are a web browser, Zyxel router and network access. Mentioned below are the steps that you need to carry out in order to log into your Zyxel router and access the setup page.
To open the setup page of your router, your device needs to be connected to the internet. So, get connected to the network either through ethernet cable or through wireless network. Therefore, the first thing that you need to do is to connect to the wireless router.
In case you don’t know the password of your wireless network, then get connected to the internet by using an ethernet wire as it does not require you to enter a password.
Launch your internet browser and enter the IP address in the location bar of the browser. The common IP address for the ZyXEL router is 22.214.171.124. In case the IP address that you enter does not work for you, then you can take a look at the list of default IP addresses for your model.
In case you are connected to your Zyxel router device, then you can search for the IP address by going to the routerip.com. This is a quick way to search for the IP address.
In the next step, you are required to enter the username and password in their respective fields. In case you don’t know what the username and password are, then you can read out the default credentials on the internet.
Moreover, you can learn how to reset them. The username and password are also printed at the back of your router unit.
After you are done with the Zyxel router login, then the next step is to make changes in the present settings.
Please ensure that you don’t break the network while configuring the router. Also, note down the present settings so that you can return to original settings whenever you need to.
What to do if the Router Stops Working after Configuration Changes?
In case you end up making a mistake, which breaks ZyXel home network, then you can go back to the original settings by performing a 30-30-30 hard reset. This reset is actually done when you are left with no other option to make your router work.
In case you are able to access the interface, then you can go back to the previous settings but you can only do that if you have the original values noted down.
So, this is all that you need to know to log into Zyxel router and access the setup page. All you have to do is to follow 3 basic steps. The first thing is to ensure that you are connected to the internet.
After that, login to the router by entering the IP address in the URL section of your browser. Lastly, enter the username and password of your Zyxel router.