How to Setup Brostrend WiFi Extender Signal Booster

Setup Brostrend WiFi Extender Signal Booster:

Brostrend Wi-Fi Extender is actually a very sophisticated device that can help you activate the dead zones in the overall internet connectivity landscape in your office or in your home. 

But for this, you need to setup Brostrend Wi-Fi Extender Signal Booster using either of the ways mentioned in this futuristic and insightful guide.

By Implementing the Brostrend Setup using the WPS Easy Setup Process

The ideal way to setup Brostrend Wi-Fi Extender Signal Booster is to proceed with implementing the Brostrend Setup in the sequential steps discussed below.

Step 1 - Begin by inserting your Brostrend Extender into a power socket that is in the vicinity of the primary router.

Step 2 - Make sure that the PWR LED has turned solid blue after which you have to press your router’s WPS button to actively enable the WPS pairing function.

Step 3 - Now continue pressing the WPS button present on the Brostrend Extender within two minutes of pressing the WPS button on your router.

Step 4 - Patiently wait for Brostrend Extender’s LED to turn solid blue and then venture out to browse the internet in any part of your home office.

Using the Web User Interface is the Other Option for Effectuating the Brostrend Setup    

When you are willing to setup Brostrend Wi-Fi Extender Signal Booster the other feasible option happens to be the Web User Interface which can easily allow you to setup Brostrend Wi-Fi Extender Signal Booster in just a few minutes.

Step 1 - Here as well you have to initiate by plugging your Brostrend Extender into the power socket followed by waiting for the PWR LED to turn solid blue.

Step 2 - Now by default, you must cause to pair your Brostrend Extender with the router.

Note 1 - Please note that the name of your Brostrend Extender will get reflected as BrosTrend_EXT.

Note 2 - If you really want to get the extended network on your mobile, you must go ahead to disable the mobile data before scanning. In case you want internet access on your PC then it’s a no-worry situation as your computer will automatically obtain the DNS server and the concerned IP address.

Step 3 - Continuing the attempt to setup Brostrend Wi-Fi Extender Signal Booster, you must now launch the website named http://re.brostrend.com or you can also type in the “192.168.0.254” inside the address bar followed by pressing the “Enter” button.

Please remember you can set your log-in password here to be able to modify the Wi-Fi Settings in the future.

Step 4 - When you are on the “Web User Interface” choose the SSID which you want to extend followed by entering the Wi-Fi password and further pressing the “Extend” button to be successfully able to setup Brostrend Wi-Fi Extender Signal Booster.

Consequently, you must see the “Extended Successfully” page on your screen.  

A Few Noteworthy Points in the Context of the Brostrend Extender Setup  

Step 1: You can opt to use Brostrend Extender as an adapter to integrate a wired device or multi-user gaming console.

Step 2: If your primary router supports WPA or WEP encryption, there is a strong possibility that your Brostrend Extender may not be able to find the Wi-Fi network. In such a case you must cause to modify the router encryption settings to the WPA-PSK or the WPA2-PSK standard followed by scanning the current Wi-Fi network.