How to Setup Default IP for Buffalo Linkstation?

Setup Default IP for Buffalo Linkstation

Facing problems while you setup default IP for Buffalo LinkStation? As a common part of knowledge, you must know that most Buffalo routers have a default IP address of 192.168.11.1.

While using and accessing the routers, we may sometimes forget its default IP. For that case, you can use a tool to instantly find out the Buffalo router IP address. Please make sure that you are connected to the Buffalo router network in order to use this tool.

The IP address is crucial information required to access the web interface of the Buffalo router. Once you access it, you can configure too. Some of the router models don't follow the standards, so you will have to check the IP individually if the common one doesn't work.

You can read the instructions to understand how to find out Buffalo LinkStation default IP if you are connected to the router's network.

In the list below, you can see the most common IPs as reported by the users of Buffalo routers. 

• 192.168.1.1 
• 192.168.0.1 
• 192.168.100.1 

For accessing the web interface of the router, you must know its username and password. You can go to the default settings for the router corresponding to your model. If you don't find your router model in the list, then you can use the same default username and password common for most Buffalo Routers.

Procedure to Find Out Your Buffalo Router Gateway IP

Consider that you have already setup default IP for Buffalo LinkStation but then you have changed your Buffalo router default IP address. What next? May be because you can't remember it, you get the flexibility of finding it out easily for any OS you are working on.

You simply have to follow some instructions below to find out the default IP. Please note that these methods also work when the router gets it's IP address assigned by DHCP.

Procedure to setup Default IP for Buffalo LinkStation

Steps to Find Buffalo Router IP on Windows

Step 1: Press Win + r keys together.

Step 2: This will open up a prompt screen.

Step 3: Type and enter cmd into the input field and then press the enter button.

Step 4: A command prompt will open up on screen.

Step 5: Enter the following command into the command prompt as ipconfig | findstr /i "Gateway" and then click enter.

Step 6: You can see that your default gateway will show something like 192.168.0.1.

Steps to Find Buffalo Router IP on Linux

Step 1: Open a terminal window by using the shortcut ctrl+alt+t keys together.

Step 2: Enter the following command: ip route | grep default and press the enter button.

Step 3: Last, you will see the Buffalo router's IP address on screen.

Steps to Find Buffalo Router IP on OSX

Step 1: Firstly, open the OSX Terminal following the order: Finder > Applications > Utilities > Terminal

Step 2: Alternatively, you can press cmd+space keys and then type terminal

Step 3: Enter the following command: netstat -nr | grep default and then press enter.

Step 4: You will see the Buffalo router default IP something like 192.168.0.1

Steps to Setup a Static (Fixed) IP Address on a Buffalo LinkStation

• Access the LinkStation settings through the web user interface. If you don't remember the current IP, you can locate with the help of NAS Navigator. If not installed, you can install NAS Navigator for either Windows or Mac system from the Settings section.
• You will see the current configuration. The default DHCP setting is enabled which allows LinkStation get an IP address automatically from a DHCP server.

• In this dialog box, you can do various changes. For setting a static IP address, click the radio button and disable DHCP. Then enter the IP and subnet mask into fields and click on the OK button. 

• Next, you will be asked to visit new IP address and then navigate to the network configuration screen under advanced settings.
• The list displays the new IP address. Here, you can modify the default gateway and DNS server settings if original DHCP values are not correct. Lastly, click on the Change button.

• Once the setup is finished, you can log out the Settings and exit from the web browser.

Hope this information is helpful to setup default IP for Buffalo LinkStation.