How to Setup Opticover WiFi Extender

The "opticover wifi extender" provides a safe network space for your data. The 'optic over wifi extender" is quite compatible with every device. If you want to set up the optic over wifi extender at your home or office, then you can do this using two different methods. You can set up the optic over a Wi-Fi extender via WPS, or you can also use a web browser to set it up.

Some of the essential equipment required for the setup process of an "opti cover wifi extender" is a router, an ethernet cable, a computer or smartphone device, and a power source.

How to Setup an Opticover WiFi Extender Through WPS?

Stated below are the steps that one needs to perform in order to set up an Opticover extender via WPS.

Step 1: The first thing that you need to do is to connect your extender to an electrical outlet close to the router and then turn on your extender. Please ensure that your Wi-Fi extender is on the repeater mode.

Step 2: Press the WPS button for some seconds and wait for the lights to start blinking.  

Step 3: Now, press the WPS button on your extender for around 6 seconds and leave the button when you see the lights flashing.

Step 4: When the blinking light becomes stable, then that means your wireless repeater is connected to the router and you can use it. Now, you can change the location of the extender with the network's range for removing the dead zones.

Choose the network with _EXT and the password of your router for accessing it.

How to Set up an Opticover Extender Using a Web Browser?

Mentioned below are the steps that you need to carry out in order to set up an Opticover extender using a web browser.

Step 1: Connect your extender to the power source and then power on your wireless repeater. Please ensure that you put your extender device on a repeater mode. Also, move your Opticover extender close to the router.

Step 2: Open the list of Wi-Fi networks on your computer or phone. Open the network by connecting it to the default WIRELESS N option.

Step 3: Launch your internet browser on the connected device and enter the IP address 192.168.188.1 in the location bar of the browser.

Step 4: Go to the next page and make a new password for logging in further. Click on Start.

Step 5: Choose the network of your router and then enter the password (this is not the password that you created just now). After that, click on Next.

Step 6: Create a new network name if you wish to. In case you don't want to create a new network name, then click on Next.

Step 7: Now, check all the details appearing before you and then select Save. This will successfully setup your Opticover extender.

Opticover extender is a wireless repeater that has gained a lot of popularity in the market recently. You can either use this device with a wire or wirelessly. This wireless extender can fix many Wi-Fi issues leaving no dead ends. It has access point mode as well as repeater mode. Opticover extender supports the speed of up to 1200 Mbps which is remarkable.

So, these were the two different ways to set up an Opticover Wi-Fi extender.