Your Xfinity Modem Blinking Orange is a not-so-common phenomenon that may actually reflect a temporary halt of your Xfinity Modem causing an interruption in the provision of seamless internet connectivity.
This may happen due to a variety of reasons ranging from overheating of your Xfinity Modem to the scenario of temporary outage comprehending which ultimately forms the crux of this discussion.
So, by presenting this quick guide at your disposal, here is an appeal to have a quick look at all possible reasons which may be the real cause of your Xfinity Modem Blinking Orange along with ways of fixing the Xfinity Modem Blinking Orange.
Some unexpected voltage fluctuations or any mild technical snag of unknown nature may be the cause of your Xfinity Modem Blinking Orange which might be fixed by running a Power Cycle on your Xfinity Modem blinking Orange.
To get this done, just switch off your Xfinity Modem, unplug all the connecting cables and wait for a few minutes. Thereafter, plug in all the cables and turn ON your Xfinity Modem to check whether the issue of Xfinity Modem Blinking Orange has been taken care of or not by this simple method of running a Power Cycle.
If there has been some activity in the nature of scheduled maintenance conducted by the Xfinity Technical Team it may result in a temporary outage and you may witness the issue of your Xfinity Modem Blinking Orange.
In such cases, you are advised to contact the Xfinity Service Assurance team to ascertain the timing and extent of scheduled maintenance activity and must patiently wait for the maintenance activity to get over.
Additionally, you may subscribe to the Xfinity Modem service alerts that will keep you aware of any scheduled maintenance activity that will be undertaken by the Xfinity Modem Technical Team in the future.
A loose connection, faulty cables, and moisture in the Wall Jack may all be causing your Xfinity Modem to blink orange ultimately warranting a separate treatment discussed underneath.
Step 1: In case the wires connecting your Xfinity Modem with the Power Outlet are damaged then you must remove the damaged part and must replace them with a new one.
Step 2: If the cables are loosely connected at either end then the connectivity between the Gateway and the Service Provider may wither away. In such cases, you must first unscrew the cables and must again fix and tightly screw the same to facilitate a seamless power supply to your Xfinity Modem that will eventually let the internet connectivity prevail.
Step 3: In case there is moisture in the wires or in the Wall Jack then you must have the wires and Wall Jack kept open under the Sun to remove the moisture after gently cleaning the same with a cotton cloth.
It is noteworthy that you also clean the ends of the ports which will not just help you establish the internet connectivity but will also assist you to restore the condition of your Xfinity Modem blinking orange.
In case you are using a Splitter for bundled Internet+TV services then there is a fair chance that your Splitter may be faulty which may lead to the situation of Xfinity Modem blinking orange.
To address this situation you must ensure whether your Splitter is faulty or not and if you find your Splitter faulty then you must get it replaced with a new one or else you must clean the same Splitter and must plug it back.
Placing your Xfinity Modem in a narrow and dreary zone may give rise to the overheating of your Xfinity Modem which may ultimately be causing your Xfinity Modem to blink Orange. In such a scenario you must first switch off your Xfinity Modem and remove it from the place where it was first placed.
Going forward, you must fix your Xfinity Modem at a place that is reasonably above the ground and away from any physical obstructions where proper cool air is flowing in. Also, you must ensure that an appropriate power supply aloof from any serious voltage fluctuations is directed to your Xfinity Modem persistently.
Either to execute heavy data-downloading activity you may have been using your Xfinity Modem in an excessive way or by hooking up more and more devices to your Xfinity Modem you may have eventually caused your Xfinity Modem to become overloaded and disrupting the Xfinity internet services thereby prompting your Xfinity Modem to start blinking orange.
As a solution to this, you must immediately disconnect all extra devices from the Xfinity internet network and must also limit the number of devices that you wish to connect to your Xfinity Modem in the future.