How Can I Setup TP Link Router as a Repeater

I am using tp-link router as a repeater but I saw various problems while making a setup? If you have a large house or simply a problematic area where the Wi-Fi signal from your main router isn't strong enough, it's possible to use a second, spare router you may have lying around to cure the problem. Here we explain how to set up a router to act as a wireless access point.

  • Nick

  • 1


  • 1 year ago

Answer Link
Answer - 1

Setup of a TP-Link Router as a Repeater:-

As we are aware that routers are the best device that share data info from one device to the other at a specific network. There are many ways at which we can make a setup of a TP-Link router as a repeater? Below we have mentioned what can be done to fix an issue for setting up a TP-Link router as a repeater. Just follow the method as described here to diagnose an error by using special tools.

There are some of the few steps that helps to make a setup of a TP-Link router as a repeater as:-

  1. Using a second wireless router as a ‘repeater’ or well known your main router is one way of extending your wireless network. This can be done in a couple of different ways, depending on your router and whether or not your home is cabled for Ethernet.
  2. There are some routers and setups where this is not possible. Our home hub routers can be used for this purpose only, but it's a slightly more involved process. A few ISPs lock down their equipment such that it cannot be used in this way. However routers purchased independently can almost always be used, as can most routers supplied in the past by ISPs. An old router can be connected to a new router: they don’t have to be the same model or even from the same manufacturer to work.
  3. As mentioned above method will found to be beneficial for you. If they don’t and you still want better Wi-Fi coverage, it might be worth investing in a powerline adapter kit with integrated Wi-Fi. All powerline kits with built-in Wi-Fi were very highly expensive but now they can cost is too high. But individual adaptors (without Wi-Fi) can cost as little as £10, so it may well still be worth using your spare router instead of shelling out extra for a Powerline kit with Wi-Fi. Go through the below points that might helpful for you.
  4. Another option is buying a dedicated range extender or bridge to go along with the existing router. So improved Wi-Fi coverage doesn’t have to be expensive.
  5. First you need to find out some details about the router you're currently using, including which channel it is broadcasting on and what security type do we use to make a tp-link router as a repeater.
  6. For any windows operating system that is installed into your PC that was connected to your network, go to the Control Panel and double-click on Network or Network and Internet. In Windows XP, right-click the network connection that's being used to connect to your router (either Wi-Fi or Ethernet) and choose Status, then Support, you will see a window that displays how your network is set up.
  7. If using OS as Vista, Windows 7, 8 and 10, then go to the network and sharing centre, now choose change adapter settings, then right-click the appropriate connection and choose Staus, then mention all it’s details.
  8. This window will show your gateway on a screen and the computer’s IP address. Write it down your gateway as this is the address of your primary router usually in the format as it’s default IP address as or similar to a TP-Link router.
  9. If found any problem in setting up of a tp-link router as a repeater, then contact to our tp-link router technical support helpline number that is available for all-time for twenty four hours.
  • Published by:  Edward   
  •  1 year ago