TP-Link is a router brand that has put a dent in the world of router products. It won’t be wrong to say that it has completely revolutionized the router market. One of the most amazing TP-Link router brands is TP-Link AC750 dual band router.
It has many astounding features. The wireless router has a speed of 750 mbps. This router is incredible for office as well as home use. It is extremely simple for one to setup a TP-Link router. Any individual can complete the setup procedure on his or her own. So, here is an easier explanation on how you can setup TP-Link ac750 router.
To start with the connection procedure, we must keep the router in the right place. You must not keep the router in a place where there is powerful electromagnetic interference. Also keep it away from a place there is a lot of heat or moisture.
Step 1: First of all, you need to turn your modem off and remove the battery back up.
Step 2: Connect the ethernet wire to your router’s WAN port.
Step 3: After that, turn on your router and wait for at least 2 minutes after rebooting it.
Step 4: Connect your router to the power source.
After that, to start the setup procedure you need to connect your computer system to the router. It is recommended to perform the entire setup procedure using a wired connection. Disconnect your router from the power source. Now, connect one end of the ethernet wire to the router and the other end to the computer system. In order to have a wireless connection, you need to enter the SSID and password. The network name and password are generally printed at the back of the router.
Now, we will begin the configuration process that can be done by opening the internet browser and entering the IP address in the location bar of the browser. Click on the search icon and then the internet-based setup page of the router will open up.
Step 1: Select the IP protocol automatically and dynamically to acquire the IP address on your system.
Step 2: Visit the setup page of your TP-Link router. Enter admin in both the username as well as the password section.
Step 3: Once you log in, a screen will pop up where you will have to choose the option of setup.
Step 4: If you wish to setup your router quickly, then you will have to select the type of connection. If you are not sure, then you must select auto-detect. After that, you will move on to the page where you will have to enter further details.
Step 5: In the last step, you will be asked to enter the network name as well as the password. Additionally, you will have to enter the type of security that you will be using. It is always recommended to choose WPA2 personal.
Step 6: The settings that you have selected will be displayed in front of you and then you will be required to save those settings.
Finally, the process to setup TP-Link ac750 router is complete.
How to Setup TP Link AC750 Router?