• Home
  • || How To Access My TP-Link Router Remotely

How To Access My TP-Link Router Remotely?

Please let me know that how to access my TP-Link router remotely. I am facing some issue while accessing TP-Link router. If you know then help me.

Access My TP-Link Router Remotely-

A router is a device used to connect two or more networks and forward the data between them. Often a single wifi router cannot extend its range in the entire house that’s when additional routers or extenders are needed.

TP-link routers are one of the most effective routers that are available in the market. The network extended by them is secure, safe, and has a long-range. It is highly affordable and easily available as well. 

There are different methods to remotely access your TP-link router. Instead of searching the internet for questions like how to Access My TP-Link Router Remotely, read further to find out the various methods with which you can easily access the router remotely. 

There are two existing ways with which you can access your router remotely. 

  • Through TP-LINK Tether app
  • Through TP-LINK remote management service

1. TP-Link Tether App:

Step 1: There are a few steps of configuration that are required to Access My TP-Link Router Remotely steps. The setup process should be completed on your PC for the first time setup. 

Step 2: Now, check if your TP-Link router is correctly connected to your computer.

Step 3: Open your internet browser (Internet Explorer, Chrome, etc) and navigate to your TP-Link router’s IP address in the URL http://tplinklogin.net

Step 4: The screen will show up the TP-Link’s login portal

Step 5: To identify your TP-Link’s router IP address using the command prompt app and type in iconfig command. This will help you get the IP address for your TP-Link router. 

Step 6: You can also find the IP address of your TP-Link from the label on the router. 

Step 7: Login to the portal using the information available on the TP-Link’s label. 

Step 8: On the left side of the panel click on TP-Link cloud

Step 9: Login to your TP-Link cloud account. 

Step 10: After this download the TP-Link tether app from the Google Play store app or Apple Store. 

Step 11: Read the service agreement and click on agree to proceed further. 

Step 12: Tap on the more option available in the top left corner. 

Step 13: Click on TP-Link ID from the left side and log in to the app with your ID and password.

Step 14: Next, the message might be displayed above your cloud connection name in my devices window you can verify your remote connection. 

Step 15: This will allow you to access your TP-Link router remotely from anywhere with your device. 

2. Through TP-Link Management App:

Step 1: Open your default internet browser on the computer that is connected to your wifi network. 

Step 2: Navigate to TP-Link’s administrative interface using login credentials. 

Step 3: Login by using the correct credentials to avoid any error. 

Step 4: Under the Security tab click on Remote management available on the left side panel. 

Step 5: Enable the Remote Management service which by default is disabled. 

Step 6: To enable it, replace your existing Remote management IP address with a remote IP address. 

Step 7: Click on Save to apply the changes. 

Step 8: With this you can access your TP-Link router remotely from another device with the specific IP address. 

Follow any of the above methods under the guide How to Access My TP-Link Router Remotely.

  • 1

TP Link Remote Management:

If you wish to learn how to configure remote management for your TP-Link wireless router, then read below.

Steps that You Need to Follow to Configure Remote Management. 

Step 1: First of all, you need to open your internet browser and then go to the location bar of your browser. After that, enter the IP address 192.168.1.1 in the location bar of your internet browser. Then, finally, press the Enter key.

Step 2: Open the login page and then enter your username and password. You need to enter admin in both sections. 

Step 3: After that, go to Security and then finally select Remote Management given on the left.

Step 4: Now, the function of remote management will get disabled. To turn on this function, you are required to change the Remote Management IP address. This will be changed from 0.0.0.0 to a particular remote IP address. If you want, you can change the web management port to a particular port if required. This also improves security. 

Step 5: When you are done performing all the steps mentioned above, the last thing that you need to do is to save the settings by clicking on Save.

  • 1

Tags

  • Access My TP-Link Router Remotely

How To Access My TP-Link Router Remotely

Post Your Answer

Client Review's

Angelo Tambong

Router Technical Support helped me to solve the WiFi network connection issues instantly. Really helpful!

Vamshi Dasari

I was facing a problem due to my WiFi Security Settings. They helped me to correct the settings. Excellent support!

Claudia Marie

My WiFi router was acting up, I thought that it was due to bad weather but it wasn't. Router technical Support helped me to figure it out.

KC Bacena

If you ever get stuck with a router problem, contact Router Technical Support. I totally recommend them.