If you are a user of TP-KLink router and wish to learn how to log into a router and access the setup page, then you have opened up the right page. Here you will get to know all that you know about how to log into your TP-Link router.
The web interface of the router is its control panel. That’s the place where all the settings are saved and where you can make alterations in the settings. To make any alterations in the settings you are first required to log into the router.
1) Please Ensure that you are Connected to the Router
To open the setup page of your router, the first thing that you need to do is to get connected to a network. You can either get connected to the network by using an ethernet wire or through Wi-Fi.
In case you can’t recall the password of your wireless network, then getting connected to the network using an ethernet cable would be the best. This does not require you to enter a password.
2) Launch your Internet Browser and Enter 192.168.1.1 in the Location Bbar
Launch your web browser and then enter the IP address of your router in the URL section. The common IP address for the router is 192.168.1.1.
In case that does not help you login, then you can start searching for the IP address by looking at the list of default IP addresses that are particularly for the models that you are using. You can also go to what is my router IP website to find the IP address of your router.
3) Enter the Username and Password
After entering the IP address, the login portal will open up, there you will have to enter the username and password of your router. Enter the present username and password in the respective sections.
In case you don't have any idea about the username and passwords, then take a look at the default credentials available on the internet. Also, you need to learn how to reset the password.
The username and password are also written at the back of your router unit. After you are done logging in using your credentials, the web interface will open up before you. This will enable you to configure anything on the device.
After you are done logging into the admin interface of your router, the next step that you need to take is to change the available settings. Also, you need to ensure that you don’t break the network while configuring your router.
Note down the current settings prior to making any changes so that you can go back to the previous settings whenever you need to.
If anyhow you end up making any changes, which causes some breakage in the home network, then you can move back to the default settings by performing a 30-30-30 reset. This is the solution that you apply when you are left with no other way to fix your problem.
If you are able to access the interface, then you can try to login and go back to the initial settings but that can only happen if you have noted down the original value.
So, these are all the things that you need to know about TP-Link router login.