Hello, Please tell me about how to setup TP-Link N300 wifi range extender. I don't about this how to setup. Please help me in this problem to seting up TP-Link wifi range extender.
1
Ans
2 years ago
TP-link extenders are the most popular wireless standards in the market these days; they are effective as well as cheap. To set up a TP link and 300 wifi range extender, you need to first login to the router page and access the wireless settings.
Now, to access the wireless settings, you need to know the IP address, the name of your network, and the password. Once you are done managing the wireless settings, you can review the settings of your network in the last window and hit the finish button to save everything. The TP-link router will now restart and give you access to the Internet.
Before you move forward and do anything with your TP-Link WiFi extender, the first thing that you need to do is to obtain the IP address. Along with that, you must also know the name of the network and the password for getting access to the network.
Step 1: First of all, you need to log into the router. That can be done by entering the IP address or URL of the login page in the address bar of your web browser. Generally, 192.168.1.1 is the address, but it can be some other address as well.
Step 2: Now to set tp-link n300 wifi extender, get access to your router’s wireless part and enter the details given above that is the IP address, the network name and the password for gaining access to the network.
Step 3: Log into your router. In case the router does not give any response to the given IP address, then there is a chance that it has a separate IP address. Some routers also make use of a 10.XXX range, if your case is also the same, then you must follow these steps.
First of all, you must connect your TP-Link extender to the computer system by using an ethernet wire. This is important for programming the wireless settings into the system, so it can allow you to connect.
The TP-Link router is now going to restart, and it is also going to enable you to have access to the internet. Try testing it using an ethernet wire and then without using one that is wireless.
Based on your TP-Link router’s model, there can be a light placed on its front, which will help you know whether it is connected to the network or not. Carefully, check the lights to know if you can maintain the connection.
In case there is a WPS button on your router, then that can also be used for configuring your Wi-Fi range extender. WPS Wi-Fi protected setup enables you to safely and automatically configure the network. This is a physical button placed on the back of your router and is labelled as WPS.
If you use the WPS button, then you will not have to configure your TP-Link extender manually. Press the WPS button. By doing so, you are saying to the router that you are connecting it to a device and that a wireless-protected setup has been enabled. A two-minute window is going to come up in front of you that will say that the router will accept a connection with security.
Copyright 2018-23 © Router Technical Support | All Rights Reserved