How To Setup TP Link Tl-Wr700N

TP Link wr700n Setup Windows 10:

Step 1: Windows 7 & Windows Vista: Go to Start->Control Panel ->Network and Sharing Center

     Windows XP: Go to Start->Control Panel->Network Connections

Step 2: Windows 7: Go to Network andSharing Center->Change Adapter settings

    Windows Vista: Go to Network andSharing Center->Manage Network Connections

    Windows XP: (Go to Next Step)

Step 3: Windows 7 Vista and XP: Right Click Local Area Connection >Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.

Step 4: Windows 7 Vista and XP: Select "Use the Following IP address:"

Type the following information:

1. IP address: 192.168.0.10
2. Subnet mask: 255.255.255.0

Click OK to exit

Step 5: Click OK again to apply the settings.

Setup TP Link Tl-Wr700N:

Step 1: Go to Quick Setup-> Click Next

Step 2: Select AP-> Click Next

Step 3: Customize your wireless name (SSID) and password

• Wireless Radio: Enable
• SSID: (Rename Your Wireless Name)
• Region: (Select Your Current Location)
• Channel: Auto
• Mode: 11bgn mixed
• Channel Width: Auto
• Security Options: WPA-PSK/WPA2-PSK
• PSK Password: (Create a Private Password)
• Click Next

Step 4: Click: Reboot and wait until it goes to 100%