How to Update Asus RT-AC68U Firmware ?

Update Asus RT-AC68U Firmware:

If you wish to know how you can update the Asus RT-AC68U firmware, then you have come to the right place to  learn how to update the firmware of your router.

It is necessary for you to update the firmware of your router on a regular basis. You can either do the manual update of the firmware of your Asus router.

Mentioned below are the steps that you are required to carry out in order to update your ASUS router manually.

Steps to Updates Asus RT-AC68U Firmware-

Step 1: The first thing that you need to do is to launch your internet browser and then go to ASUSWRT (http://router.asus.com).

Step 2: Then, you will see a pop-up message at the top right corner in case any firmware update is available.

Step 3: Select the option of update now and then you will move to the System Page under Administration. Choose the option of Firmware Upgrade.

Step 4: After that, you must wait till the update gets completed.

Manual Update on Asus RT-AC68U Firmware-

Step 1: Download the most recent version of the firmware for the access point you are using.

Step 2: First download the file and then unzip it.

Step 3: Launch your internet browser and then go to ASUSWRT.

Step 4: Start searching for Administration in Advanced settings. Select Firmware Upgrade and then select the option of upload.

Step 5: Select the firmware file that you wish to upload. After that, select the button of Open to upload firmware.

Step 6: Wait for sometime for the upload to get completed.

So, these are all the steps that you need to carry out in order to Update Asus RT-AC68U Firmware. If you have any doubts or any queries, then you can get them cleared by getting in touch with the Asus router customer service team.

Also Read:

Frequently Asked Questions

Q1. What should I do if my ASUS RT-AC68U gets bricked after a firmware update? Ans: If your RT-AC68U does not boot after a firmware update and the power LED keeps blinking without stopping, you can recover it using the ASUS Firmware Restoration tool. First download the Firmware Restoration utility from the ASUS support website for your model. Connect your computer directly to the router with an ethernet cable plugged into one of the LAN ports. Set your computer to a static IP address of 192.168.1.10 with subnet mask 255.255.255.0. Turn off the router, then hold the Reset button while powering it back on. Keep holding Reset until the power LED starts blinking slowly which means the router is in rescue mode. Run the Firmware Restoration tool, browse to the firmware file you downloaded, and click Upload. The tool will push the firmware to the router and restore it. Do not unplug the router or disconnect the ethernet cable during this process. Once complete the router will reboot with the new firmware and you can access it at 192.168.1.1 to reconfigure your settings.