You have to log into your Arus router or modem to make changes in your router settings. You need to use default Asus router login credentials if you are setting up your Asus router for the first time.
The Asus router login information is mentioned in the manual that comes along with your router device. If you don't know how to log into your Asus router, then continue reading. In this guide.
You will read all the steps that you need to carry out to access your Asus router settings. You need to connect your Asus router to the computer using a wired or wireless connection to access the Asus router login page from the web interface.
Below are the easy steps that you need to carry out to connect your Asus router to your PC.
Launch your web browser. You can use any browser such as Firefox, Chrome, Opera, etc. Now, go to the address bar of your browser and then enter the IP address 192.168.1.1.
Then, press the enter key. After that, the login screen of your router will open up before you. Enter the username and password of your Asus router and then click on login. After that, proceed to the control panel of your router. There, you can change the settings of your router.
Go to the left side menu and then select the Wireless option under Advanced Settings. Then, you are required to set up your wireless-related information. You need to set the band to 2.4 or 5 GHz.
If you are using a dual-band router, then you must configure the Wi-Fi bands one by one. After that, go to the network name and then update the name of your Wi-Fi network. The wireless mode should be set to Auto.
Then, set WPA2 personal as the authentication method. After that, create a strong password for your Asus wireless network. Once you are done doing all the things, then you need to click on the Apply button.
Tips to Update Asus Password
Below mentioned are the easy steps that you need to perform in order to change the login password of your Asus router.
You can also click on Show password to make sure that the password you are entering is correct. In the end, click on Apply and then save the settings.