How to Upgrade Firmware Version of TP-Link Wireless Router

Is there anyone who knows about how to upgrade firmware version of TP-Link wireless router. I am facing some issues in this. Help me.
  • Cyrus

  • 1


  • 10 months ago

Answer Link
Answer - 1

Upgrade Firmware Version of TP-Link Wireless Router:

Do you want to know how to upgrade the firmware of your TP-Link wireless router? If yes, then you have opened up the right page as here you will get to know all the steps that you need to perform in order to upgrade the firmware of your router. Before you move ahead with the steps, there are some points that you need to keep in mind. 

Points to Remember

  • Some router models have various hardware versions. It is important for you to check the hardware version of your choice. If you upgrade the wrong firmware, then it can terribly damage your device.
  • If you are using Archer C7 version 4, then you must select version 4 only. It is important for you to find the right hardware version and carry out the necessary steps before the upgrade. 
  • You must not upgrade the firmware using a wireless connection. 
  • Do not disconnect the ethernet wire when the upgrade is going on.
  • Carefully read the notes when you download the firmware. There are some cases where new firmware does not support a backup file of the previous firmware. In such a case, you will have to reconfigure your router manually

Steps to Upgrade the Firmware of Your TP-Link Wireless Router

Below mentioned are the simple steps that you need to carry out in order to upgrade the firmware of your router. 

Step 1: Download the latest version of firmware on your device. Open the TP-Link website and then navigate to the download center of your region. Also, you are required to choose the corresponding version of your hardware. After that, select Firmware. Now, a list of firmware will appear before you. 

Step 2: Go to the .ZIP file and extract the firmware from there. 

Step 3: Log in to the web management page of your TP-Link router. 

Step 4: Select the option of Firmware tools upgrade and then select the option of browse or choose a file to get the firmware file. Now, click on Open. 

Step 5: After that, select the button for Upgrade. Once the upgrade is done, the device will restart

Step 6: Go to Status and see if the firmware of your router is upgraded or not. 

Step 7: Sometimes, your router goes back to factory default settings after a firmware upgrade. In such a scenario, you should run a Quick Setup Wizard for reconfiguration of your router device.


  • Published by:  Mark   
  •  10 months ago