The “ASUS ZenWi-Fi AX Node not connecting” issue may persist or become common if you are setting up your Zen Wi-Fi for the very first time. In this situation, it becomes advisable that you go about following either of the ways as enshrined in this quick guide which undoubtedly serves as the panacea for fixing the “ASUS ZenWi-Fi AX Node not connecting” issue.
The most ideal way to go fixing the “ASUS ZenWi-Fi AX Node not connecting” issue is perhaps logging in to your AiMesh user account and checking the signal strength.
Going ahead if you find the signal strength reasonably bad or poor then you should reposition your node until it starts receiving optimum signal strength.
In an unwanted scenario, you may witness the “ASUS ZenWi-Fi AX Node not connecting” issue owing to your client trying to connect to a node that is placed at a fairly more distance from the position of your device. To move ahead with fixing this you must keep your device closer to the node and try connecting to it.
Another probable cause for the “ASUS ZenWi-Fi AX Node not connecting” issue could be attributable to the fact that the client may be trying to connect to the Wi-Fi directly because of higher Wi-Fi strength.
In the given scenario you must endeavor to bring down the Roaming Assistant to a level of 90dBm for 2 and 4 GHz which would enable you to balance the system accurately as your powerful Wi-Fi may be sending out more than enough power that may be interfering and hindering the nodes and making it difficult for clients to connect to the nodes.
If you resort to updating to a Beta Firmware the issue of “ASUS ZenWi-Fi AX Node not connecting” may be very well taken care of in a convenient and phased manner.
To get this done, simply download Beta Firmware for your ASUS nodes from the official ASUS website followed by adhering to the updating instructions available on the website. The key noteworthy point here happens to be executing the nodes first and then upgrading your main router.