I have a DSL connection but when I Plug in the Belkin it shows limited connectivity.
Step 1 : Choose a convenient location to begin installing your router such as an open floor space or table. This does not need to be the permanent location of the device. Particularly for wireless routers you may find it necessary to re-position the unit after installing it as the cables / signals may not reach all areas needed.
At the beginning its better to choose a location where it's easiest to work with the router and worry about final placement later.
Step 2 : Plug in the router's electrical power source then turn on the router by pushing the power button.
Step 3 : (Optional) Connect your Internet modem to the Belkin n150 router. Most network modems connect via an Ethernet cable but USB connections are becoming increasingly common. The cable plugs into the router jack named "WAN" or "up link" or "Internet".
After connecting the cable be sure to power cycle (turn off and turn back on) the modem to ensure the router recognizes it.
Step 4 : Connect one computer to the router. Even if the router is a wireless model connect this first computer to the router via a network cable. Using a cable during router installation ensures the maximum reliability of the equipment.
Once a wireless router installation is complete the computer can be changed over to a wireless connection if desired.
Step 5 : Open the router's administration tool. From the computer connected to the router first open your Web browser. Then enter the router's address for network administration in the Web address field and hit return to reach the router's home page.
Many routers are reached by either the Web address "https://192.168.1.1" or "https://192.168.0.1" Consult your router's documentation to determine the exact address for your model. Note that you do not need a working Internet connection for this step.
Step 6 : Log in to the router. The router's home page will ask you for a username and password. Both are provided in the router's documentation. You should change the router's password for security reasons but do this after the installation is complete to avoid unnecessary complications during the basic setup.
Step 7 : If you want your router to connect to the Internet you must enter Internet connection information into that section of the router's configuration (exact location varies).
If using DSL Internet you may need to enter the PPPoE username and password. Likewise if you have been issued a static IP address by your provider (you would need to have requested it) the static IP fields (including network mask and gateway) given to you by the provider must also must be set in the router.
Step 8 : If you were using a primary computer or an older network router to connect to the Internet your provider may require you to update the MAC address of the router with the MAC address of the device you were using previously. Read How to Change a MAC Address for a detailed description of this process.
Step 9 : If this is a wireless router change the network name (often called SSID). While the router comes to you with a network name set at the factory you will never want to use this name on your network. Read How to Change the Router SSID for detailed instructions.
Step 10 : Verify the network connection is working between your one computer and the router. To do this you must confirmed that the computer has received IP address information from the router. See How to Find IP Addresses for a description of this process.
Step 11 : Connect additional computers to the router as needed. If connecting wirelessly ensure the network name (SSID) of each is computer matches that of the router.
Step 12 : Finally configure additional network security features as desired to guard your systems against Internet attackers. These WiFi Home Network Security Tips offer a good checklist to follow.