How can i connect my belkin n600 db wireless n+ router?
Recently, I brought the wireless router at Staples. I tried it on my computer, with the CD and everything, and I got to complete the steps, but somehow, my whole computer freezes every time I complete the installation process? I don't know why. My modem is Scientific Atlanta 2203C. Please provide assistance.
Hey buddy, to install Belkin N600 DB Wireless N+ router, you should follow the steps that are described below -
Although the process of setting up Belkin N600 DB Wireless N+ router with Scientific Atlanta 2203C modem is very easy you need to follow each step carefully.
1.Firstly you have to connect your computer to Scientific Atlanta 2203C modem through an ethernet cable. Also, verify that the ethernet cable should not be torn or frayed otherwise you can face complex glitches. After connecting the computer to the modem, you will see a login screen from where you have to note username and password.
2.Now, unplug your Belkin router and also Scientific Atlanta 2203C modem.
3.Plug Scientific Atlanta 2203C modem into the WAN port of Belkin N600 DB Wireless N+ router. Also, connect your computer to Belkin router numbered ports.
4.In next step, turn on Scientific Atlanta 2203C modem and wait for a few moments. Also, make a fresh restart of your computer and plug in your Belkin N600 DB Wireless N+ router.
5.Now, go to Start> Control Panel>Network Connections.
After this, press a right click on “Local Area Connection” and check your network connection properties.
6.Next, tap on “TCP/IP” and press click on the checkboxes that is next to the option “Obtain an IP address automatically”, ”Obtain DNS server address automatically”.
7.Launch your web browser. Now you are prompted to Belkin router setup wizard where you have to enter login credentials. Hopefully, after following these steps you will understand how to setup Belkin N600 DB Wireless N+ router with Scientific Atlanta 2203C modem. During this process, if any difficulty arises in front of you then please ask for support by dialing Belkin Technical Support Number. Here, a team of experts is always available to deliver instant and accurate solution so that they can full-fill customers needs on time.
Just connect the cable from the silver port on your modem to the yellow port on the Belkin, and connect a LAN cable from your computer to one of the grey ports on the Belkin.Unplug and restart the modem and the router (in that order) without waiting for the modem to start to do the router.If you see the name when you view your wireless network, just click on Connect button. After that, protect your network using a password so no one can access your internet without the proper code.You don't need to run the CD to set up the router (especially if it is crashing). I hope you should have the internet afterward.