Hello, your problem regarding Arris Router Password Reset is very common and it is faced majority consumers. No need to worry as this can be done easily by following simple steps. I would recommend you to follow the steps below to change the password.
In case you are not able to do the Arris Router Password Reset please contact Arris Router Support for complete assistance.
Step 1: First you need to Hard Reset your router, i.e press the small “Reset” button at the back of your Arris Router for 30 seconds. This will set your router to its Factory settings.
Make sure that you don’t repeat it more than 3-5 times as this may damage your router permanently.
Step 2: Connect your router to the computer using a LAN or Ethernet cable and check internet connectivity. If yes move to next step otherwise contact your ISP.
Step 3: Open the web browser and type 192.168.0.1 in the URL field and hit “Enter”. This will take you to the default home page of your router.
Step 4: Once on the homepage, you will be prompted to enter username and password. The default username is “admin” and leave the password field blank and hit “Enter”.
This will take you to the dashboard of your router page.
Step 5: Go to Security settings and change the security to WPA or WPA2 and fill in a strong password you can remember. Once done click on “apply” button.
Step 6: Write down this password for further use. Once done switch off your router for few minutes before switching it on.
Hopefully, the above-mentioned steps helped you in Reset Arris Router Password. In case if you are facing the issue even now, try contacting Arris Router team for complete assistance. They will guide you and help you in changing the password with ease.
You can access Arris router password by performing a hard reset. For hard resetting, follow these troubleshooting steps:-
Finally, Your Arris Router password has been reset.
Hi Piyush, it is very easy to reset Arris modem password. Press and hold the reset button on the back of your wireless router. Connect a computer to one of your router's Ethernet ports (but not the one that says WAN).
In the browser address bar, enter the IP address of your router's administration interface.
Enter the default administrator login name (usually "admin") followed by the default administrator password. Click on the "Admin" page from your router's configuration page and create a strong password.