Are you searching for the MSRM extender's wireless network setup instructions? Having trouble with the MSRM configuration? Want to use your high-speed internet connection throughout your home or office, even in dead zones? Don't worry if you answered yes to these questions! You've arrived at the right place.
This article will provide you with simple and straightforward instructions for setting up an MSRM WiFi extender. Follow the below steos to make MSRM WiFi Extender Setup.
It is a good idea to confirm that there are dead spots in your residence or office before getting the MSRM WiFi booster device.
For MSRM extended WiFi setup, follow the steps below:
Step 1: First, connect your MSRM WiFi fluctuate extender to an electrical outlet. Turn on the the extender device.
Step 2: From your wireless device, such as a laptop, phone, or tablet, navigate to the WiFi choice screen. Choose MSRM from the list.
Step 3: Next, open your preferred internet browser. the context of the URL bar of your web browser, enter the IP address 192.168.10.1.
Step 4: You will now be directed to the administrator section of the MSRM extender.
Step 5: The system will now prompt you to enter your login credentials in order to enter the dashboard.
Step 9: The next step gives you the option of creating a new internet connection or using the existing network.
Step 10: In the repeater SSID field, enter the credentials from your existing wireless network. If you would like to start a new network, enter a new name. Make sure you've used the precise same password as your current router.
Step 11: Tap the connection icon to save the information you've entered. Connect to the expanded wireless network after that.
Step 12: Your MSRM WiFi extension device is now operational. Place your extender in the new or dead zone where you intend to use an online connection.
For MSRM extended WiFi setup using the WPS method, follow the steps below:
Step 1: Place your MSRM WiFi extender and routers in the same room.
Step 2: When the main LED light stabilises, press the WPS button. Following that, the infrared light begins to blink.
Step 3: Between two minutes, the button labelled WPS on the device becomes active. If the WPS option is disabled, log in to your gadget and navigate to the wireless applications where you can enable WPS.
Step 4: The WPS light on the enhancer and router will then flash for approximately 12 seconds.
Hopefully, the above-mentioned steps will allow you to complete the MSRM wireless extender setup without incident. If you have any problems configuring MSRM, please contact our professional customer service representatives at the number listed below for assistance.