If you want to learn how to setup Netgear n600 router using WPS button, then you have made the right choice by opening up this page. Here, you will get to know how to connect a device using Netgear n600 router WPS button. WPS button plays a significant role when it comes to setting up Netgear n600 router.
WPS button can be used to configure and connect a device for the present network. Mentioned below are the steps that you need to carry out to connect a device using Netgear n600 router WPS button. You can also get in touch with the customer support team if you encounter any connectivity issues.
Mentioned below are the steps that you need to carry out in order to connect a device using Netgear router WPS button.
Step 1: The first thing that you need to do is to press the WPS button given on your router device and then leave the button after a few seconds.
Step 2: Now, look for the WPS button on the device that you wish to connect to the network. Once you are done with pressing the WPS button on your router device, then you are required to press the WPS button on your device within a few seconds.
Step 3: After that, you will see a light blinking on your router. The light may blink in two case scenarios. The light may blink if your router has successfully executed WPA settings. It may also blink if the SSID has been successfully generated by your router. The light may also blink if the SSID name and WPA security settings are enabled.
In both the cases, you are required to note the WPA password and network name for accessing the network.
So, these are all the steps that you are required to perform to connect your device using Netgear n600 router WPS button. In case you are experiencing connectivity issues even after applying the steps given above, then you can reach out to the Netgear customer support team.