Are you troubled because your TP-Link power line adapter keeps disconnecting? If yes, then maybe this is happening because of some power source fluctuations and the power supply is facing regular disruption. If you are not sure whether the power supply is working properly or not, then you must connect your adapter elsewhere.
If your powerline adapter disconnects, then you need to check your network connections and see if it is secure. You can also try switching the electrical outlet you are using. You need to see if the colored lights are indicating a problem differently. If none of these things works, then you can reset your adapter.
Here in this post, we are going to discuss some situations where your powerline adapter can disconnect. So, let's talk about them one by one.
1) Power fluctuations
Disconnection issues may occur because of power malfunctions. There can also be an issue related to the power cable.
2) Internet Connections Problems
Old firmware versions can also cause disconnection problems with the powerline adapters and other incompatibilities.
3) System Issues
If you find any colors distinct from the usual ones, then that means there is some serious system problem. You can easily resolve this problem by performing a soft or hard reset.
Before you go ahead, did you ever try re-plugging your powerline adapter from the electrical outlet? The entire process is about coming to a single power fluctuation and then re-inserting the power adapter. If this does not help you fix your problem, then try other solutions to fix your problem.
If your power adapter is disconnecting again and again, then you can try changing your electrical outlet. A lot of users have mentioned that the TP-Link powerline adapter shouldn't be connected to any strips as it can lead to fluctuations.
Additionally, ensure that your adapter is connected to a wall outlet where you had a different device connected. This will ensure that the power supply of your adapter is enough.
If the above-mentioned solutions are not working, then you must try to troubleshoot your network. If you find that the internet is not working in your house, then that means your powerline adapter got disconnected.
In this case, you must carry out the steps to troubleshoot your network and fix all network-related problems.
You must hard reset your router in order to refresh your network.
Below are the simple steps that you are required to carry out in order to perform a power cycle or a hard reset.
Step 1: Disconnect the power adapter of your device for at least 5 minutes.
Step 2: Connect the power adapter to the main electrical outlet.
Step 3: When you feel that your router is feeling cold when you touch it, then you must turn it on and power on the network.
Depending on the bandwidth usage of your network, a few speed-related issues can appear that can disconnect your devices. Therefore, it is always recommended to limit network usage.
Below are the simple steps that you need to follow in order to reduce network usage.
Step 1: Reduce the high-quality streaming.
Step 2: Stop your ongoing downloads and uploads.
Step 3: Stop seeding files till the end of the post.
Step 4: Disconnect unnecessary devices connected to the wireless network.
It is important for you to ensure that your router is updated. You can easily access your router through a mobile app. You can easily update it manually. In case your router does not have an app, then you must paste 192.168.1.1 in your internet browser. Then, you must log in using your default credentials by going to the control panel.
Once your adapter gets in the right direction and you find that your TP-Link powerline adapter is disconnecting. There is a chance that there is a problem with the cables in your configuration. Therefore, it is recommended to reconnect all the cables and ensure that your wiring is correct. Below are the steps that you need to follow in order to reconnect your cables.
Step 1: Disconnect the ethernet cable of the power adapter.
Step 2: Please ensure that your ethernet cable is not hardware damaged.
Step 3: Now, reconnect your ethernet cable to the power adapter.
After you are done reconnecting, check if you are still facing a disconnection issue.