The control panel of your Apple router is its web interface and that is the place where all the settings are saved and can be changed. In order to make any modifications in the settings, you are first required to log into your Apple router.
There are three things that one needs in order to log into the Apple web interface. These three things include a web browser, access to the network, and Apple router. Carry out the directions given below in order to configure your Apple router.
In order to open the setup page of your router, you must ensure that you are connected to a network.
So, the first thing that you need to do is to connect to the network either through an ethernet wire or through the wireless network.
In case you don’t know the password to your wireless network, then get connected to the network using an ethernet wire as by doing so you will not be required to enter the password.
The next step for Apple router login involves launching your web browser and then entering the IP address of your router in the location bar of your browser. The IP address for Apple router is 10.0.1.1.
In case this IP address does not work out for you, then start locating the IP address of your router by opening up the list of default Apple IP addresses.
Now, that you are connected to the Apple router, you can use routerip to search for IP. It is also known as the private IP value of the router.
After that to login to the Apple router, enter the present user ID and password in the respective sections and then hit enter or click on sign in.
In case you don’t know what the username and password are, then take a look at the default credentials to know what the defaults are. Also, get to know how you can reset the credentials.
The username and password are also given at the back of the router device.
After you are done logging into the Apple admin interface, you can make changes in the router settings.
Write the present settings on a piece of paper prior to making any changes, so that you can go back to the same if you need to.
If you happen to make changes in the settings that further breaks the home network of Apple, then you can go back to the default settings by performing a 30-30-30 reset. This is something one does when he or she is left with no other option but to fix the problem.
In case you are able to access the interface, then you can go back to the original settings. This is only possible if you have written down the original value prior to changing it.
So, these are all the steps that one is required to perform in order to login to an Apple router. All you need to do is to ensure that you are connected to the network. After that, enter the IP address of your Apple router in the internet browser and then finally enter the username and password.