Troubleshooting Tips in Setting up the Linksys Mesh Routers?

Please let me know the troubleshooting tips in setting up the Linksys Mesh routers. I have no idea about this. Help me.

Troubleshooting Tips in Setting up the Linksys Mesh Routers:

When you are using Linksys Mesh Routers for getting seamless internet connectivity in your office or home you can have a certain degree of assurance as regards receiving higher and consistent bandwidth from your Linksys Mesh Router.

But on some rare occasions, you may witness multiple scenarios that may materialize in the form of issues like “Router not found”, “Setup of your Wi-Fi router is pending”, etc. which require execution of certain very useful troubleshooting tips in setting up the Linksys Mesh Routers.

What to Do When the Issue “Router not Found” Materializes

In case your Linksys Router is not found by your computer or any other device you may see a message “what kind of network are you willing to set up” which needs to be resolved.

So, to get this issue of “router not found” fixed you just have to switch ON your Linksys Mesh Router and check that the light on your Linksys Mesh Router has turned Solid purple. Please do take note that if the Linksys Router’s light doesn’t turn Solid Purple then you must go ahead with resetting your Linksys Mesh Router.

Troubleshooting Tips in Setting up the Linksys Mesh Routers When Another Node Gets Detected

When a different node of your internet network is ON it may be reflected by the glowing of the corresponding LED which may result in your system-based application not being successful in detecting the node that you are probably trying to set up ultimately leading to “No Internet Connectivity”.

In such a strange scenario you must cause all other nodes to Turn Off except the Parent Node. Thereafter, you must go clicking on “Find a different node” followed by making a second attempt to set up the Linksys Mesh Router connection.

When No Internet Connectivity is Detected by Any Mobile Device

The troubleshooting tips in setting up the Linksys Mesh Routers also come in handy when you see a different message that reads as “connect to your router’s Wi-Fi setup” in a situation where you are using a mobile device that is not connected to any Wi-Fi.

To fix this up you must facilitate the Linksys Mesh Router Setup by configuring the Internet Service Provider’s settings. In this context, it is worth noting that whenever a PPPoE connection is detected you must furnish the relevant credentials of your Internet Service Provider followed by punching the Username and the Password when prompted.

Using your Linksys Mesh Router as a Child Node

The troubleshooting tips in setting up the Linksys Mesh Routers also prescribe implementing a system wherein you can use your Linksys Mesh Router as a child node by taking note of the points mentioned hereunder.

Step 1 - The primary thing that you should be focusing on is making sure that Child Node is brought in sync with the Parent Node and once this system is given effect to then the Child Node is transferred to the desired location.

Step 2 - Please note that when you plan to implement a wired backhaul with your Linksys Mesh Router, just ensure that your second Linksys Mesh Router is established as a Child Node. It is also noteworthy that when your Linksys Mesh Router is configured as a Child Node the Internet Port of your Linksys Mesh Router culminates in a LAN port into which you can plug another node or an Ethernet Client.  

Step 3 - It is also to be noted that while applying the troubleshooting tips in setting up the Linksys Mesh Routers pertaining to making your Linksys Mesh Router work as a child node you should not connect your Linksys Mesh Router with an existing Velop network. Instead, you should go resetting the Parent Node and add your Linksys Mesh Router as a Child Node to the given Parent Node.

Step 4 - At this point in time it is also stated as a caution that If your Linksys Mesh Router is directly plugged into the Parent Linksys Mesh Router working as a Parent Node there will arise a definite IP Conflict error on the WAN port which will automatically cause the IP address to change to 10.10.10.x which will result in a scenario of clients connected to the Main or Parent Node will not be able to access the network of the Parent Node.

While I used my Linksys Mesh Router, I also came across on different occasions a whole host of connectivity issues that I could easily fix by exercising various troubleshooting tips in setting up the Linksys Mesh Routers.

Friends, it is worth sharing at my end that when I attempted to fix router-related connectivity issues, I realized that there are a few very useful troubleshooting tips in setting up the Linksys Mesh Routers which can be referred by you anytime while moving ahead to fix various do-it-yourself connectivity issues.

So, here I take this opportunity to share all possible troubleshooting tips in setting up the Linksys Mesh Routers that will prove pretty effective.

  • 1

Troubleshooting Tips in Setting up the Linksys Mesh Routers

Post Your Answer

Client Review's

Angelo Tambong
Router Technical Support helped me to solve the WiFi network connection issues instantly. Really helpful!
Vamshi Dasari
I was facing a problem due to my WiFi Security Settings. They helped me to correct the settings. Excellent tech support!
Claudia Marie
My WiFi router was acting up, I thought that it was due to bad weather but it wasn't. Router technical Support helped me to figure it out.
KC Bacena
If you ever get stuck with a router problem, contact Router Technical Support. I totally recommend them.