How do I Setup My Linksys 2.4 G Wireless Router

Complete Setup of Linksys 2.4 g Wireless Router

To set up your Linksys 2.4G wireless router you need to make sure to get access to the internet setup page of your router and configuration of the router's Wi-Fi settings. Different steps are to be followed for different wireless routers. Open your web browser, enter the IP address 192.168.1.1, and press enter.

You will be redirected to the login page of the router. Enter your username and password, and you will be logged in after entering all the required details. You can now manage the wifi settings of your router. This way, you can configure the wifi settings of wireless-N routers.

Learn more: How to Login linksys router?

• Get access to the internet-based setup page of the router
• Configure your router’s Wi-Fi settings

How do You Setup My Linksys 2.4 G Wireless Router?

Step 1: Open the internet-based setup page of your router. Launch your internet browser and put the IP address 192.168.1.1 in the location bar of your browser and then press enter.

Step 2: After that to setup my Linksys 2.4 g wireless router, enter the login credentials. Do not enter anything in the username field and type admin in the password section. Finally, press enter.

• Configure your router’s Wi-Fi settings.
• Configuration of the Wi-Fi settings is dependent on the type of router you are using.
• Configuring Wi-Fi settings of wireless-N routers.

If You are Using a Wireless-N Router, Then These are Some of the Points That You Need to Follow.

Step 1 : On the internet-based setup page of your router, go to the Wireless tab and select it.

Step 2 : To setup Linksys 2.4 g wireless router, click on manual to view configuration.

Step 3 : Choose mixed on the drop-down list of the network name.

Step 4 : Enter the name of your network in the SSID field.

Step 5 : From the channel width drop-down list, choose Auto( 40 MHz or 20 MHz).

Step 6 : Go to the drop-down list and select Channel. It is advisable to choose either channel 11, 6, or 1 as they are considered non-overlapping.

Step 7 : Choose the SSID broadcast setting of your choice. If you want other people to see the name of your wireless network, then choose enabled.

Step 8 : Now, save these settings.

Configuring Wi-Fi settings of wireless-A, wireless-B, or wireless-G routers

In Case You are Using Wireless-A, Wireless-B, or Wireless-G Routers, Then Follow These Steps:

Step 1 : On your internet-based setup page, click on the wireless.

Step 2 : Choose mixed out of the options given in the wireless network mode.

Step 3 : Enter the name of your wireless network in the SSID field.

Step 4 : Choose the wireless channel of your choice from the drop-down menu. The channels to choose are 11, 6, or 1 as they are non-overlapping.

Step 5 : Select the wireless channel of your choice. If you want your network name to be viewed by the public, then select enable. If not, then disable.

So, these are all the steps that one must perform to setup my linksys 2.4 g wireless router.