How to Fix Linksys Router Connection Problems

Fix Linksys Router Connection Problems:

If your Linksys router and adapter reject the connection, it can be an exasperating experience. Additionally, it is not simple to trace and fix Linksys Router Connection problems in a router system. So, this article acts as a source of information for users who un-expectedly face Linksys complications.

When Linksys Routers Become Difficult to Control-

Though a lot of people claim that Linksys is a leading home computer networking brand, their software has a few objectionable elements. In any case, you will inevitably face a glitch as soon as you acquire a router and adapter combination.

This handbook will help figure out the issues in your Linksys arrangement. This manual was committed to paper during the usage of a PC on Windows XP. If you are a Mac user, you can either resort to a miraculous quick fix or flick through this guide to determine how to fix Linksys Router connection problems in OSX. In case you are a Vista or Windows 7 user, then make use of this manual to get to the heart of the complication.

The Error-

How to Restore Your Linksys Router/Adapter Connection to Working Order?

‘Cannot link with the Access point’ was my error message in the Linksys adapter software menu's dashboard. I reassessed the connection type, password, manual settings, etc. I also re-started the Router, re-installed the software, etc. Regardless of what action I took, my Linksys router and Adapter said no to linking up. The real difficulty is that this malfunction can crop up without a cause.

The explanation for this error message is that Linksys's software is dreadful. Don't set it up! It's critical to use Microsoft Windows to pull it off. Here's a rapid method to help you complete this process.

Router settings-

Making a start

Set up the router on the first computer and the adapter on a different PC. To fix Linksys router connection problems and re-establish your connection, here is a quick look at the actions I took. At present, my personal computer with router up the stairs is despatching perfect signals to the PC on a lower floor, which is accepting signals via its adapter.

Establishing the Router Driver on Your First Computer-

1. To begin with, do not set up the Linksys software.
2. As an alternative, save its drivers to a brand-new folder on your desktop using the Linksys support page. You can make use of the drivers present in the CD (that accompanied the router), even if the version on Linksys's website may be quite recent.
3. In case your router is not set up by now, link it by complying with the instructions in the leaflet.
4. As soon as you reboot your PC and it queries you about setting up the driver, firstly, go along with the options under "Install drivers manually" and/or "Have disk."
5. Next, place it towards the driver folder you've downloaded to your desktop.
6. At that point, your PC will set up the drivers for your router.

Setting up the Adapter Driver on Your Second Computer-

1. At this moment, set up your adapter in your second computer (this PC is aimed at collecting signals from the router.)
2. Establish the Card following the instruction manual but avoid launching the Linksys software.
3. As an alternative, copy the drivers to your desktop for a second time.
4. Confirm that you're using the appropriate driver version for that specific Card (for example, do not employ a 4.1 driver for a 4.0 adapter card).
5. The adapter version must be on a label on top of the Card.
6. Reboot your PC as soon as you set up the Card.
7. The minute Windows locates the hardware, apply the driver installation steps as truthfully as possible (exactly as in step 1).
8. At first, choose "Install drivers manually" and/or "Have disk."
9. Later on, aim it at the driver folder on your desktop, and it will launch your software.

Organizing the Router's Settings-

By now, your router and adapter must be fitted in their matching computers, with the most recent drivers. Afterward, set up your router to fix Linksys router connection problems.

• Next, pay a visit to the PC that has the Router joined to it.
• After that, launch your internet browser.
• Go to see http://192.168.1.1/ This action will expose your router configuration panel.
• Go along with the following guidelines.
• Refer to the highlighted sections and set aside everything else as default.

"Setup" Tab/"Basic Setup" Sub-Tab: Set to "Automatic Configuration - DHCP."

• After that, click the radio button by the side of "Enable DHCP server."
• Ensure the "Maximum number of DHCP users" field has a digit (that corresponds to the number of computers that will be receiving Internet access in your residence.) In my case, it was 2.

"Wireless" Tab/"Basic Wireless Settings" Sub-Tab: Wireless network mode should be set to "Mixed."

• "Wireless Network Name" should be easy to recall (perhaps your first name and last initial).
• This section is an incredibly critical segment that you'll need for future reference.
• To conclude, position "Wireless SSID Broadcast" to Enable.

"Wireless" Tab/"Wireless Security"

1. Fixing Linksys router connection problems this way is completely your responsibility to decide.
2. For myself, I'm making use of "WEP" mode as I have an iPod Touch that hooks up to a Wi-Fi Internet connection and is only aware of WEP at 128 Bits.
3. Conduct experiment using this method; going back to the past and modifying it to something like "WPA Personal" is within your capabilities.
4. For a passphrase, develop a password; this is the second most critical point for your subsequent reference.
5. Click "Generate."
6. The password will create four "Keys."
7. Afterward, it is essential to scrutinize "Key 1".

"Wireless" Tab/"Wireless MAC Filter" Sub-Tab: Set "Wireless Mac Filter" to "Enable."

• Underneath "Permit Only," pick out "Permit only PCs listed to access the wireless network" (this action prevents your next-door neighbor from pocketing your wireless cable connection).
• At this point, go to see your second computer along with the adapter card.
• Click "Start" and "Run" in MS Windows.
• Write CMD before hitting Enter; this action will introduce a DOS prompt.
• Key in ipconfig /all and try to find a MAC address (it will be known as a "Physical address" on the list and will emerge as "01-A2-B3-E4-23-B5".)
• Put this information in writing.
• Return to the computer that is joined to the router. In this situation, the router configuration screen is accessible.
• At the outset, ensure that you are on the screen under the "Wireless" Tab/"Wireless MAC Filter" tab.
• Soon after, click "Edit Mac Filter List."
• Key in the MAC address/Physical address that you've noted down from another computer wherever on the pop-up list.
• Ensure you apply the proper format and include the colons; however, don't make use of dashes. It should turn up as 01:A2:B3:E4:23: B5.
• Click "Save settings."

"Access Restrictions" Tab/"Internet Access" Sub-Tab: Next to "Status, click "Enable."

• At this point, write down the policy name.
• It's merely a user profile like MySecondPC.
• Click "Allow" adjacent to "PCs."
• Ensure you verify "Everyday" and "24 hours."
• Click "Save settings."
• After that, ensure "MySecondPC" (or your preferred Policy Name) is itemized in the dropdown selection in the topmost part of the monitor, by the side of "Internet Access Policy."
• At this time, your second computer gains access to your router though other users inside its range have been confined (given that they are not on the access list.)

Adapter settings-

Getting hold of a signal in your adapter, At this point, your router system has been completely arranged. Subsequently, attempt to receive the signal on your second computer with the help of the adapter card. Keep in mind that we are availing ourselves of Windows and not Linksys's software.

Getting hold of the router signal on the wireless network list

1. Double click the "Network connections" icon on the bottommost and right-hand part of the PC screen in the Windows tray.
2. It must present a screen that displays all the wireless signals in the neighborhood. With a bit of luck, it must exhibit the signal transmitted by your router.
3. It will be shown with your primary name and most recent initial or whatever you called it in the first part of this guide.
4. In case you can't locate this "Network connections" window, obtain it from Start / Settings / Control Panel / Network.
5. The moment you notice your router's signal on the list, double click it.
6. If your router's signal does not come into view, something erroneous took place during your router arrangement.
7. Probably, your router has a "Wireless SSID Broadcast" set to "disable" inside the "Wireless/Basic Wireless Settings" menu of the router setup page.
8. Revisit and inspect it.

Joining the signal utilizing the WEP Key 1

At this point, Windows will make an effort to hook up the signal being transmitted by your router. In case the whole thing gets carried out satisfactorily, a dialog box requesting for the "WEP Key" crops up at some point in the router setup.

This key is auto-generated (as the router software interpreted it the minute you submitted that password and clicked "Generate" (regarding "Configuring the Router's Settings," Step 3, above.) Also, keep in mind that it produces 4 WEP Keys, although recalling just one is necessary.

1. In the beginning, return to your PC along with your router.
2. Later on, click the "Wireless" tab and the "Wireless Security" tab.
3. At first, try to find "Key 1" and later on, jot it down on a piece of paper.
4. It's a lengthy string, made up of 26 letters and numbers.
5. Write down Key 1 in the dialog box on the computer plus the adapter.
6. It will request you to enter it two times; in fact, the second time is purely to confirm.
7. Click OK.
8. Now, your computer must connect to your router as you have put an end to your problem.
9. In case the adapter does not link up to the signal, write the WEP Key for a second time.
10. When typing, ensure your caps lock is on, and you are writing details in the approved manner.
11. Because of its length, it's simple to enter erroneous information.