How To Troubleshoot Your Belkin Wired Router

Troubleshoot Belkin Wired Router:

Today we all are enjoying the benefit of the internet service. The internet service is available in almost every household. This has been made possible because of the use of the routers. As we all know that a router is an electronic device and it can come across any kind of technical fault at any point of time. Issues related to routers are pretty common and people use different methods to fix router related issues.

If you are using Belkin router and you are also facing issues assocated with it, then worry not as this article contains all the necessary steps that you need to perform in order to troubleshoot your Bekin wired router. Below is the steps by step process that you can follow in order to fix the problem that you are encountering and will enable your router to start functioning in a normal way.

How to Troubleshoot Your Belkin Wired Router?

Step 1: First of all, you need to ensure that the power and ethernet wire are connected to the right ports of the router. Check if the cords are loosely connected. If yes, then connect them properly.

Step 2: Remove the power wire from the back of the router. Do not disconnect the power wire from the power source. After that, wait for 10 seconds and then reconnect the power cord to the router. The lights will blink and then you can send it back to your router.

Step 3: Enter the IP address of your router and then open the setup utility. Take a look at the settings and then ensure that your router is sending the right signal. Also, ensure that your default security settings are not changed.

Step 4: Go to the area of channel settings under the configuration utility and try to replace the wireless channel. In case you are living in an urban area where there is a high possibility of wireless signal overlap, the channel that you wish to use may get occupied with some other channel.

Step 5: In the end reset your router. If none of the above-mentioned ways could yield any positive result, then this is the last option that you can try out. The function of reset is present in the configuration utility. However, you have to keep in mind that if you are using this option, then all the settings will be removed and your router will return back to default settings.

So, these are all the steps that you can perform to troubleshoot Belkin wired router.