If you are going to open your Arris SURFboard SB6190, you need the IP of your device, the username, and password. You will see that information in the Manual of your Arris SURFboard SB6190 default router login.
But in case you don’t have the manual for your router or you don’t want to read the complete manual to see the default login information then you can follow the guide below. To acquire the router login page it required that you are connected to the router.
Step 1 : Follow the instruction to Arris SURFboard SB6190 Default Router Login:
Step 2 : Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Step 3 : Enter 192.168.100.1 (the default IP to access the admin interface) in the address box of your internet browser to get the router's web-based user interface.
Step 4 : You will see 2 text fields where you can enter a username and a password.
Step 5 : Take a look at the bottom of your router. You will see your login details. If not found then take a look at the manual of your router.
Step 6 : Type the username & password, tap ‘Enter’ and now you will see the control panel of your router.
If the above-mentioned methods didn’t work and I still don’t get access to Arris SURFboard SB6190!
All you have to do is to reset your SURFboard SB6190 router. It can easily be done by clicking on the reset button at the back or at the bottom of your router. If you press this small button for approximately 20 seconds, you may have to use a thin paper clip, then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your router, you will lose your connection online. It is accordingly good to take an expert's assistance in this regard.
Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.
If you are facing issues with your Arris SURFboard SB6190 Default Router Login and can't find a right procedure to fix it, or you don't know the Arris modem login information for your device and suppose it perhaps have gone changed, reset the device to factory settings.
You generally do this by pressing and holding the reset button on the back of the modem for about 15 seconds. This resets all the default settings such as passwords, which may solve your problem or make it easier for you to log in to the device.
Resetting the Arris SB6190 to its factory default settings, you have to follow the steps given below:
The unit will reboot automatically. When the power light stops flashing, the unit has been reset and is ready to use. Resetting the router fails to reset the firmware to a previous version, but it will change all settings back to factory defaults.
Arris SB6190 Router Security
Change Arris SB6190 Default Wifi Name (SSID)
Rename your Arris SB6190 Default Wifi Name (SSID). Some Arris routers attach to default network names with the name of the manufacturer. We suggested to use a different name because a default name uselessly determines the make of your router, making it easier for attackers to break in.
Change Arris SB6190 Default Password
It is effortless for a hacker to find out the manufacturer’s default password for your Arris SURFboard SB6190 Default Router Login for use that password to access your wireless network. So it’s better to change the administrator password for your Arris SB6190 router.
When you’re choosing your new password, try to select a difficult series of numbers and letters and never use a password that can be guessed easily.
MAC Address filtering for Arris SB6190 router
MAC filtering permits you to restrict access to your Arris SB6190 router. To activate this feature, type into your Arris SB6190 router the 12-character MAC ID of each computer that will connect to your network. Make sure to update this information if you add or remove devices.
Disabling Broadcast SSID for Arris SB6190 router
Arris SB6190 router forwards your Wi-Fi network ID named SSID to everyone. It may be changed by deselecting the equivalent box in the settings. Then your network will not be hacked so easily. Although, as an understanding, you will have to type the SSID every time that you connect a device to the network. This step is not mandatory.