How to Configure Router for Accessing Wi-Fi?

Configure DLink Router for Accessing Wi-Fi:

Step 1: Open a web browser such as Internet Explorer.

Step 2: Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.15.1 is the default IP of most VOIP routers.

Note:

• If the IP address of the router has been changed, type the IP address of the router in the Address bar instead.
• The IP address of the router can be changed by these factors:
• If you run the setup CD of the router
• If you change it on the web-based setup page of the router
• If you forgot the IP address of the router, you can try one of these steps:
• Check the IP address of the router.
• Press the Reset button at the back of the router for 30 seconds.

Note: This procedure resets your router to factory defaults. Any settings on the router are erased. The IP address of the router will be 192.168.15.1 and the password is admin after you reset it.

Step 3: A new window prompts for a User name and Password. Type admin for User name and Password, since admin is the default user name password, and then click OK.

Note:

• If the password of the router has been changed, type the new password of the router in the Password field instead.
• The password of the router can be changed by these factors:
• If you run the setup CD of the router
• If you change it on the web-based setup page of the router