Question

How to Fix Linksys Router is not Showing All Devices

Please let me know that how to fix Linksys router is not showing all devices. I am facing these issues while using Linksys router. Help me.
  • Tymal

  • 1

    Ans

  • 1 year ago

Answer Link
Answer - 1

Fix Linksys Router is not Showing All Devices:

Are you bothered because your Linksys router is not displaying all the devices? If yes, then worry not as here we will tell you how to fix this problem. In this post, we are going to talk about some basic troubleshooting procedures that can help you get rid of the Linksys router is not showing all devices issues.

You can take a look at the DHCP client table as that table will give you a good idea of all the devices that are connected to your network both wired and wirelessly.

There, you will see the name of the device together with other information such as the assigned IP and Mac address. Also, you will get to know the details like the interface it is connected to and the time till the duration expires. 

How to Resolve Linksys Router not Showing all the Devices Issues?

1) Please Make Sure that the DHCP Server is Enabled

 

Below are the steps that you need to follow in order to enable the DHCP server. 

Step 1: First of all, launch the web browser of your choice. 

Step 2: Go to the location bar of your browser and then enter the IP address. 

Step 3: After that, press the Enter key. 

Step 4: Then, the login prompt will show up on the screen. There, you need to enter the username and password of your router. 

Step 5: Now, the web-based setup page of your router will open up. There, you need to scroll down to the Network Setup section. 

Step 6: After that, you need to check whether the DHCP server is enabled or not. If it is disabled, then you must enable it by selecting the radio button. 

Step 7: Now, select the option of Save Settings. 

See the DHCP client table on your web-based setup page.  Also, ensure that the DHCP server is turned on. After that, go to the Status tab, local network, and then select DHCP Client table. You can see this under the section of the DHCP server. Now, you will see a list of clients that are presently connected to your network. 

2) Access Your Device's Configuration Page

Users talk about buying an IP camera and getting an IP address by connecting it to the router. You may not get any result if your camera's IP setting isn't in the same segment as your router. The client table shows the devices that are presently connected to your router.

The first thing that you need to do is to check whether your camera is listed or not. This will allow you to retrieve your router's IP address to access the configuration page of your device. 

3) Select the Refresh Option on Your DHCP Client Table

Please keep in mind that it is going to take around 24 hours or even more for a connected device to appear in the list. Your main goal is to see the list of updated clients. You must not forget that the DHCP client table provides a useful Refresh option.

You must use this refresh option a few times before you go ahead with other troubleshooting methods available on the internet. 

  • Published by:  Mark   
  •  1 year ago