Step 1 : In the first step to setup a Linksys WRT54G wireless G router, you need to connect the router to the power source. Give 10 seconds and then connect the ethernet wire to the jack. Then, connect it to the port at the back of the router.
After that, take an ethernet wire and connect it to the ethernet port on your router and laptop. Now, your computer system is linked to the router and it is ready for setup and configuration.
Step 2 : After that, launch your internet browser on your Laptop and enter the IP address 192.168.1.1 in the location bar and then press enter. A window will appear and there you will have to enter the username and password for getting an access to the router configuration page. Enter admin in the username and password section.
Step 3 : Then, a setup page will open up in front of you.
Step 4 : There you need to change the name of the router to some other unique value so that it does not get confused with the other. Go to the end of the page and then save those settings. Now, click on continue when you see the settings are successful dialog box opens up in front of you.
Step 5 : At the top of the screen of settings you will see a wireless tab and then click on it. Change the name of the network or SSID name from a default value to a unique name.
You can choose the name that you chose for your router in the last step. Go to the wireless SSID broadcast option. Go to save settings and then click on continue when you see the settings are successful dialog box appear on the screen.
Step 6 : Now to setup a Linksys WRT54G wireless G router, go to the subsection of wireless security that is placed on the top of the page. In order to protect your wireless network.
You need to the dropdown box and select the WEP and from there you need to go to the WEP security drop down box choose 126 bits and 26 hex digits.
Create a password that has at least 6-8 characters and then type those characters in the paraphrase box. After that, click on generate. Then, you need to go to save settings and then click on continue when you see the “settings are successful’ dialog box. You can also select WPA protection although you need to know that all network cards don’t support this, so it is recommended to check the documentation first.
Step 7 : After that, click on the subsection of Mac wireless filter that is given at the top of the page. After that, enable the option of wireless Mac filter and then select the option of permit only PCs for getting an access to the wireless network. Go to the window of save settings and go to the end of the filter list window.
Step 8 : Now click on the button of edit Mac filter so that a new window pops up where you can enter the MAC address that is also called as the physical address for Mac computer that you will use to connect to your wireless network.
When you are done, click on the button of save settings that is placed at the end of the filter list and then again click on continue when settings are successful dialog box shows up. You can close the window of Mac address filter list.
Step 9 : After that to setup a Linksys WRT54G wireless G router, click on the tab of administration on the top of the page. To get an access to the wireless router setup page, make changes in the default password. Enter a new password in the router password field. After that, you need to confirm it.
This password is different from WEP subscription setup password. The password should have minimum 6-8 characters. After that to setup a Linksys WRT54G wireless G router, click on the button of save settings, which is at the end of the filter list window. Again, click on continue when the settings are successful dialog box appears.
Step 10 : If you face any issue at the time of configuration, then take a look at the manual that came with your router. You can also call the manufacturer.
Now, your setup procedure is complete and the network is secure.
setup linksys router wrt54g, linksys router setup wrt54g, linksys wrt54g setup