Are you looking forward to knowing how to setup Netgear WNDR3700 router? If yes, then you have opened up the right page. Here, you will get to know all the information that you need to know in order to set up the Netgear WNDR3700 router.
It is better to have two bands if you want to remain connected. Dual-band Wi-Fi means there will be very little interference of electronic appliances. This means that online streaming and gaming will go on without any interruption.
The entire setup process is divided into two parts. These two parts are Setup Step A and Setup Step B.
Before you start with the setup process, you need to work on the physical connection of the router.
Step 1: Disconnect the wires connected to your PC. Connect the power adapter of your modem and see if the power light is turned on.
Step 2: After that, connect the WNDR3700 N600 router. Connect one end of the ethernet wire to your router's internet port and the other end to the modem. The internet port is located a little far from all the other ports.
Step 3: Connect your router unit to the PC. Connect one end of the ethernet wire to the computer and the other end to one of the ports on your router device.
Step 4: Connect the power adapter of your router device and check the light to make sure that the router is turned on.
Below are the steps that you need to carry out in order to log into your Netgear router.
Step 1: Connect your computer system to the Netgear router and then open your internet browser.
Step 2: Go to the main website of routerlogin.com. In case entering this web address does not open, then try entering the IP address 192.168.1.1.
Step 3: After that, you will be asked to enter a username and password. There, enter the credentials.
Step 4: Select login. After that, the home screen will open up before you.
Below are the steps that you need to follow to fix issues that don't let you setup your Netgear router.