1
Ans
1 year ago
It takes some software issues and technical glitches to be fixed in order to Update a Linksys RE6350 WiFi Repeater. In the below article we have shown you the steps to update your range extender.
Step 1: Go to the web browser of your choice and log in to the setup page (web-based) of your range extender. Remember that there are 3 types of methods to log in.
(The default IP address of the Linksys range extender is 192.168.1.1 if your range extender fails to detect the DHCP server.
Step 2: In the next step, enter the admin password of your range extender or enter the new one if you have changed in the password field and then click login. (the default password of the Linksys range extender is“admin”).
Step 3: On the web-based setup page that you have logged in, go to the Administration option > click on the Firmware Upgrade.
Step 4: To Update a Linksys RE6350 WiFi Repeater, there are two ways to that. Automatic update and the other one is the manual update.
Automatic Update
Manual Update
You will see the progress of the upgrade process on the same screen. Make sure that the upgrade process is not interrupted and is carried out smoothly. Also, please don’t turn the device off or reset it until the process is completed.
Step 5: Lastly, click on the “save” option to apply the changes.
We hope the above article helped you to Update a Linksys RE6350 WiFi Repeater.
Copyright 2018-23 © Router Technical Support | All Rights Reserved