How to Fix Netgear WiFi Extender Keeps Disconnecting?

Fix Netgear WiFi Extender Keeps Disconnecting:

If you wish to have a high speed internet connection for your office or home, then there is no device better than Netgear Wi-Fi range extender. However, like every other device, Netgear extender may also come across technical complications. One of the most recurrent issues that users may encounter is the problem of Netgear router keeps on disconnecting. 

If you are also facing a similar situation, then here are some troubleshooting techniques that you can use. Mentioned below is the list of solutions that you can try out to fix the problem of Netgear Wi-Fi extender keeps on disconnecting. 

Issues that may Lead to the Problem of Wi-Fi Keeps on Disconnecting?

Before moving forward with the solutions that can help you fix the problem, let us first talk about the reasons that can lead to this problem. 

• Wrong placement of Netgear extender
• Getting connected to the wrong wireless network
• Incomplete installation of the extender
• Outdated version of the firmware
• Without any further delay, let us discuss about the solutions that can fix this problem. 

Solutions to Fix the Problem of Netgear Extender Keeps on Disconnecting

Mentioned below is the list of solutions that you can try out to fix the extender disconnection problem

1) Connect Your Extender to the Right Wireless Network

When the device gets installed, it provides a new extended wireless network. This network has a name different from the previous network. There is a very high possibility that you have connected all the devices to the previous network instead of the new one. Therefore, you must ensure to connect all your Wi-Fi devices to the new extended network. 

You can keep an eye on all the devices that are connected to your wireless repeater on the admin dashboard by entering the IP address 192.168.1.250. All the devices which are connected to your network will appear in the list of connected devices. 

2) Reposition Your Wireless Repeater

The range of your wireless extender depends on the place where you keep your Netgear extender. In order to get the best results, keep your Wi-Fi extender in the following positions. 

• Far from electronic devices such as home security systems, refrigerators, microwave ovens and other Bluetooth devices.
• You can also place your wireless extender away from ceiling fans, glasses, mirrors, fish tanks and concrete walls. 
• In your office or home's central area. 
• Far from metal surfaces such as metal doors and aluminum studs. 
• Close to an AC electrical outlet. 
• If you will keep your wireless extender in these positions, then you will not experience any disturbances in the Wi-Fi signal. Further, it will help you in resolving the problem of Wi-Fi extender keeps disconnecting. 

3) Power Cycle Your Wireless Repeater

Sometimes, these big technical problems get resolved by performing a simple power cycle. Below are the steps that you need to perform in order to power cycle your Netgear wireless extender. 

• Turn off your W-Fi range extender. 
• Disconnect all the wires from it. 
• Wait for a while. 
• After that, reconnect your Wi-Fi range extender to the power source. 
• Now, power on your extender. 
• After you are done performing all the steps, see if the disconnection issue is resolved or not. If the problem gets fixed, then great. If not, then try updating the firmware of your extender. 

4) Update the Firmware of Your Wireless Extender

If none of the above techniques work, then you need to make sure that your Wi-Fi extender is running on the latest firmware. If not, then maybe that is the reason why you are encountering connectivity problems. In case you find your extender device is not running on the latest firmware, then update the firmware immediately. 

In case you are not ware of how to update the firmware of your extender, then check out the steps on the internet. 

So, above were a few methods that you can try out to fix the problem of Netgear extender keeps disconnecting.