Where is the WPS Button on My Linksys Router

WPS Button on Linksys Router

A wireless Linksys router is a gadget that not only works as a router but also as a wireless access point. It delivers access to both the Internet or a private computer network. Subject to the manufacturer and model, it can work in a wired local area network, in a wireless-only LAN, or a mixed wired and wireless network.

Linking up Devices Using Wi-Fi Protected Setup WPS on Linksys router:

Wi-Fi Protected Setup™ (WPS) is a characteristic that permits you to effortlessly link up your WPS-backed client gadgets like wireless printers to your router wirelessly.

This piece of writing arranges for three approaches that you can conform to if you want to join your gadget to the router and avail of the WPS attribute.

1. Hooking up a device by means of the WPS button.
2. Linking up a piece of equipment with the help of its WPS PIN.
3. Attaching a gadget with the help of the router’s WPS PIN.

Be aware that the Wi-Fi protected Setup™ can modify and adapt one gadget at a time.  Also, the WPS button is located either on the forward-facing or the rear panel of your Linksys gadget. Also, a few Wireless-G routers may not contain a WPS feature. Consult your product documentation for in-depth knowledge of your router.

Hooking up a Device by Means of the WPS Button.

Utilize this procedure in case your client gadget has a Linksys router WPS button or if it urges you to push the WPS button on Linksys router.

Step 1:

1. Track down and push the WPS button on Linksys router.
2. Otherwise, log on to your router’s web-based setup page and adapt and modify WPS from there by clicking on the Linksys WPS button.
3. To gain access to your router’s web-based setup page, start any web browser like Internet Explorer®, Mozilla Firefox®, or Safari®.
4. At the start, type “192.168.1.1” on the Address bar; after that, press [Enter].
5. At this point, you will be requested to hand over your log-in details.
6. Allow the User name field to remain blank.
7. Write “admin” on the Password field.
8. After that, click OK.

Step 2:

1-After two minutes, click the Linksys router WPS button on the client gadget that you want to join to the router’s wireless network. However, if you want to discover how to exploit the WPS element on your client apparatus, turn to its documentation. Your apparatus should now be linked to your Linksys router wirelessly with WPS.

2-In Case You Face Complications with the Linksys WPS Setup Like:

• Connection Failure!
• Your client device failed to connect to the network.
• Examine your client device for additional instructions.

3-Push the "OK" button to carry on.

Now, you can physically organize your router’s wireless settings.

2. Linking up a Piece of Equipment with the Help of its WPS PIN.

Make use of this process in case your client gadget holds a WPS Personal Identification Number (PIN). However, be informed that this approach assumes that at present, you hold your client device’s PIN.

In case you’re not certain about how to get hold of your client device’s WPS PIN, refer to its product documentation.

Step 1

1. Log on to your router’s web-based setup page.
2. Start any web browser like Internet Explorer, Mozilla Firefox, or Safari®.
3. Write down “192.168.1.1” on the Address bar and after that, press Enter.

Step 2

1. You will be requested to hand over your log-in particulars.
2. Allow the User name field to remain blank.
3. After that, write “admin” on the Password field; next, click OK.

Step 3

1. Click Wireless > Wi-Fi Protected Setup.

Step 4

1. Write down your client device’s PIN in the blank field.
2. At that point, click the Register button.
3. As soon as the configuration procedure ends, your apparatus must at this moment be joined to your Linksys router wirelessly with the help of WPS.
4. In case you face complications with the WPS setup like:

• Connection Failure!
• Your client device failed to connect to the network.
• Examine your client device for additional instructions.
• Push the "OK" button to carry on.

Now, you can physically organize your Linksys router’s wireless settings.

3. Attaching a Gadget with the Help of the Linksys Router WPS PIN.

Take advantage of this tactic when your client device demands the router’s Personal Identification Number (PIN).

Step 1:

• Gain access to your router’s web-based setup page.
• Start any web browser like Internet Explorer, Mozilla Firefox, or Safari®.
• At first, type “192.168.1.1” on the Address bar; next, press [Enter].

Step 2:

• You will be requested to hand over your log-in details.
• Allow the User name field to remain blank.
• To start with, write down “admin” on the Password field and later, click OK.

Step 3:

1. Click Wireless > Wi-Fi Protected Setup.

Step 4:

1. Take notice of the router’s WPS PIN on the third item of the Wi-Fi Protected Setup™ screen.
2. You can also discover the Linksys router’s PIN at the lowermost section of your router plus the Serial No. and MAC Address information.
3. It is critical to note that the router’s PIN may change as per the gadget that is being used.

Step 5:

As soon as the gadget demands the router’s WPS PIN, write down your router’s unique PIN.

Step 6:

• Once the PIN is typed in, go along with the onscreen instructions for your client gadget.
• At this point, your device must be joined to your router wirelessly with the help of WPS.
• In case you face complications with the WPS setup like:
• Connection Failure!
• Your client device failed to connect to the network.
• Examine your client device for additional instructions.
• Push the "OK" button to carry on.

Now, you can physically organize your router’s wireless settings.

Additional Methods to Make use of the WPS Feature-

Furthermore, your router has the potential to link several gadgets in the network like smartphones.