How to Configure D-Link Wireless N150 ADSL2 Modem Router

Y'day i have purchased one D-Link Wireless N 150 ADSL2+ Modem Router for my BSNL Broad Band and i configured it. But while connecting it finds an error that DNS Server Not Responding So i doubt if i have configured it properly. So Guys please help me configure it right.

  • DK

  • 2


Answer Link
Answer - 1

D Link adsl2 Modem Router N150:

First acquire username and password from BSNL.

Step - 1  Create PPOE always on connection by entering username and password. on windows IP settings give a ip address the default gateway and DNS server address should be the ip address of the router.

Step - 2  Use these :

  • Router IP :
  • Subnet mask :
  • System IP:
  • Subnet mask:
  • Default gateway and DNS should be :

Hope this helps.

  •  Rony
  •   August 26, 2020
Answer Link
Answer - 1

D'Link adsl2 Modem Router N150:

Your configuration is totally correct the problem is in the server not in your modem or system or connectivity. BSNL broadband have problem even if the DSL light is stable.

Another reason is notice if the yellow DSL light in the modem get stable and then start re blinking if yes then also its the broadband issue rest check your line if having disturbance that cause this error too.

Configuration is all about connectiong wifi /modem to system if you are able to see your modem in your wifi list. your configuration is correct!

  •  Ros
  •   August 26, 2020